Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Electrical

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-24-2013, 12:54 AM
Mark rsa2au's Avatar
Mark rsa2au Mark rsa2au is offline
TT Enthusiast
Join Date: Mar 2013
Boat: Mastercraft X5 2001. 310hp preditor
Location: Australia
Posts: 178
Guages intermittant & revs reduced connected issue?

Hi Guys,

This weekend while out for a ski the guages started failing, firstly both speedo's failed, but came right when I stopped - possable cause debris in the pick ups... but both at the same time? Carried on and then all guages went to zero, and engine reduced revs..... Shut down and restarted, guages back and revs ok. 20 mins later guages all fail except for rev counter but engine runs fine... this used to happen intermittantly but is now happening often.
PS air temp about 43F and water temp about 50F (yes [email protected]#$n cold but better than the alternative.. no ski) All guages now working fine again....?

I have ordered a new temp sender, thermostats & impeller as the rev reduction might be a (false) overheat signal. ( another issue). Will the failed guages cause issues with the engine or can I continue along this line?

Checked all earth connections (ohm resistance measured ok), wire brushed and replaced where necessary, no water in speedo tubes. Could the black box be going and if so could it be intermittant or does it just fail and stop working?

Never in my 20 years (and 6 boats) of watersking have I had such an unreliable boat..... Wife and kids renamed it the Disastercraft.. ( List of other issues too long to list here) Need to change this soon or boat will have to go. Any advise appreciated!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 02:06 AM.