Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Thread Tools Display Modes
Old 01-27-2013, 10:41 PM
softailcowboy's Avatar
softailcowboy softailcowboy is offline
TT Regular
Join Date: Jul 2006
Boat: 2005 mastercraft 197 tt
Location: foothills No. Ca
Posts: 74
prop install problem

I have 2005 prostar 197 tournament team and I bent my prop. pulled it with a puller went easy and sent it to O.j. props and Eric sent me a new one. the problem is I'm not get any engagement trying to put the new prop on. It won't go on far enough to start the locknut. the splines on the shaft have no burrs and all look good. I called Eric and told him the situation and he sent me another prop. Same thing. these are the same props as were originally on it. the splines on the prop are not going on the splines of the shaft.....stumped....looking for ideas.....


Last edited by softailcowboy; 01-28-2013 at 12:01 AM. Reason: new title
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 11:02 AM.