Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Thread Tools Display Modes
Old 08-07-2018, 12:54 PM
PeterAK PeterAK is offline
TT Newbie
Join Date: Jun 2017
Boat: 1992 Prostar 190
Location: Wisconsin
Posts: 26
Driveshaft Nut Size -- Powerslot

Last night I started the project of replacing my strut. Because the strut was bent when I bought the boat and I don't know what caused that damage, I also would like to pull the drive shaft to make sure it is within tolerance. I picked up a 1-1/16" socket but it's not big enough to fit on the nut which holds the coupler on the end of the drive shaft. Boat is a '92 ProStar 190 with the Powerslot trans.

Anybody know what size this nut is? Based on what I have read here I expected the 1-1/16" to be correct. I tried searching again but no luck.

Reply With Quote
Old 08-07-2018, 01:43 PM
d2jp's Avatar
d2jp d2jp is offline
MC Fanatic
Join Date: Jun 2011
Boat: 1992 PS 205-351w,285HO
Location: Smith Mountain Lake, VA
Posts: 915
My '89 powerslot was 1-1/4". I didn't have enough room to get a regular depth socket in there, had to buy the short socket with wrench flats from skidim.
1992 ProSport 205
(Former) 1989 ProStar 190 Power Slot
Smith Mountain Lake, VA
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 12:21 AM.