Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Thread Tools Display Modes
Old 07-27-2013, 10:12 PM
kyfooter's Avatar
kyfooter kyfooter is offline
MC Fanatic
Join Date: May 2007
Boat: 2013 197 WTT / 1992 Barefoot Sanger
Location: DFW
Posts: 577
You can make or buy all the parts you need.

Buy a cable and clamp the end with ferrules. You can pop the top of the skylon off, feed the cable through, and then crimp one end. Pull it back tight, an put the top cap back on. Then, put a Small loop in the exposed end.

Buy 2" webbing strap to wrap around the bow. Use thick thread, in a crisscross pattern to sew loops in the strap.

Then, just use an ordinary ratchet strap to keep solid tension to the pylon.

For less than $25, you're set.

The foam covering is not necessary. Neither the cable nor the ratchet will hit the boat.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 02:09 AM.