View Single Post
Old 06-12-2017, 12:34 AM
jlane330 jlane330 is offline
TT Enthusiast
Join Date: Aug 2016
Boat: '06 X1 RTP
Location: Southwest
Posts: 254
Step 1: Cut off the clear face. I chucked each gauge in my lathe and turned them off. Once the "glass" is removed, the needle can be removed and access is gained into the gauge. It's a real pain to desolder the PCB inside, but it's necessary for replacing the stepper motor. Even though the oil pressure gauge was the only gauge that didn't work, I decided to replace all the steppers since issue with them seems common.

Sorry I don't have pics of the PCB/motor replacement.
Attached Images
Reply With Quote