View Single Post
Old 07-22-2018, 06:31 PM
MLA MLA is online now
MC Devotee
Join Date: May 2012
Boat: pontoon
Location: Lake Wylie Area
Posts: 1,569
Ok, let me clarify 2 things.. the ohm reading was at the speaker box terminals with the wires to the amp disconnected
Virtually the same thing in this case, so thats ok.

it’s a kx1200.1 and when the sub wasn’t playing the amps red led strip was turning off.. maybe not protect but powering off
Need to check to be sure, but IIRC, there is a red protect light. But if the logo goes out and no protect light, this usually indicates the amp has powered off. This could be voltage on the power cables or turn-on lead or an internal issue with the power supply.
Reply With Quote