PDA

View Full Version : NXT20 largest sac that can fit in rear locker?


dmgimenez
04-02-2017, 09:16 AM
new to site. boat has 450b sacs but wondering how big i can go? thanks for all your help. looking forward to this summer

Shaun R
04-02-2017, 10:06 AM
Good read on the subject. http://www.mastercraft.com/teamtalk/showthread.php?t=72486

SteveO
04-02-2017, 10:47 AM
The sumo may be a better fit than the ones I used in the tread above. The ones I had on my 20 bow the divider panels.

hyman989
04-02-2017, 12:08 PM
You can fit 675 wedge sumo sacks. Max is 20x20x40


Sent from my iPhone using Tapatalk

hyman989
04-02-2017, 12:10 PM
Sorry it's 40 long 20 high and 20 wide realized posted it wrong and can't figure out how to edit on my phone


Sent from my iPhone using Tapatalk

dmgimenez
04-02-2017, 01:28 PM
guys, thanks so much. older thread helped also. will prob try to get up to 610 in waksetters. and looks like the stabilizer bars wake setter sells are a must to keep sides from bowing.

dealer wanted $2700 for new sacs and install into existing ballast. what do y'all think about price? doesn't seem like to much effort if i buy two pumps to throw over the side for $200

thanks for all your help. #mastercraftrookie

Shaun R
04-02-2017, 02:27 PM
2700 to disconnect a hose from a bag and install another 200 dollar bag in its place?

GoneSkiing
04-02-2017, 05:39 PM
I have the 600 Sumos, fits well. I'm going to add the engine divider supports this year as well.

dmgimenez
04-02-2017, 06:07 PM
i was told the 2015 are not plug and play so they have to rework hose.

monsterwake
04-02-2017, 08:24 PM
Has anybody decided to remove the hard tanks and just put 1100 Fly High bags in?
This is what I did with my X1 years ago. But with 750's.

hyman989
04-02-2017, 08:48 PM
guys, thanks so much. older thread helped also. will prob try to get up to 610 in waksetters. and looks like the stabilizer bars wake setter sells are a must to keep sides from bowing.



dealer wanted $2700 for new sacs and install into existing ballast. what do y'all think about price? doesn't seem like to much effort if i buy two pumps to throw over the side for $200



thanks for all your help. #mastercraftrookie



That sounds about right for the cost to run new pumps and wire them up. You don't need the wall stablizer the boards are hard and don't bow


Sent from my iPhone using Tapatalk

hyman989
04-02-2017, 08:49 PM
Has anybody decided to remove the hard tanks and just put 1100 Fly High bags in?
This is what I did with my X1 years ago. But with 750's.



Don't think there is a way to cut the tanks out


Sent from my iPhone using Tapatalk