View Full Version : REV 8 LED install

05-19-2014, 09:16 PM
Anyone know why i have a buzz or squealing noise at low level through my towers when the LEDS on my REV 8;s are going. I hit the remote and turn them off, no noise. Ground is tied into a isolated line, same as my amps to the battery. Power is hooked to yellow wire for head unit.

05-19-2014, 09:42 PM
Are these RGB LED's? If so, what controller?

05-19-2014, 10:20 PM
wet sounds on REV 8's and wet sounds controller

05-19-2014, 10:22 PM
get with your retailer, they should know the fix.

05-19-2014, 10:28 PM
i did, they didn't know, and since i didn't pay them to hook up wires, they don't care.

05-19-2014, 10:40 PM
Well, sorry to hear. Call Wet Sounds and they can get you fixed up.

05-20-2014, 01:24 AM
anyone else got any ideas

05-20-2014, 02:35 AM
It might be a problem with the LED controller, these LED controllers are China s**t. The the LED controller does any dimminig of the LED's through PWM, which is where the noise comes from, and by China s**t I mean they don't cancel the noise internally and it gets into the onboard electrical system and even worse to the sound system.

You might want to try some car-audio noise supressors

05-20-2014, 03:34 AM
power wires to close to speaker wire?