PDA

View Full Version : 1996 prostar 190 shaft


william perrine
05-16-2014, 08:36 PM
Are all 1996 Prostar 190 same shaft sizes and what would it be if so. I am not near my boat to get a measurement and would like to order the stuffing box gland assembly now so it can be here by Wednesday. Thanks

atihanyi
05-16-2014, 08:49 PM
I may be wrong but if its a non slot I believe its an inch and if its a slot its an inch and an eight

william perrine
05-16-2014, 08:56 PM
I don't know what slot is or not. Just got the boat recently. It is the 350 TBI if that helps.

waterlogged882
05-16-2014, 09:03 PM
..........

william perrine
05-16-2014, 09:21 PM
Thanks, guess I need to go to the boat before ordering. Any guess as to why the 1 " shaft assembly is more than twice the price of the 1 1/8" assembly ?

waterlogged882
05-16-2014, 09:23 PM
..........

mgs96ps
05-16-2014, 09:52 PM
Are all 1996 Prostar 190 same shaft sizes and what would it be if so. I am not near my boat to get a measurement and would like to order the stuffing box gland assembly now so it can be here by Wednesday. Thanks

You don't have any pictures? A couple of pictures...and I bet you would have your answer.

william perrine
05-16-2014, 10:45 PM
No, I am at work right now. Slow night. I repair the NYC subway cars for NYC Transit, motors, doors,a/c, etc, so with a little practice this shouldn't be too hard.

william perrine
05-17-2014, 03:52 PM
Thanks for all your suggestions and help. I measured the shaft this morning. It was 1" outside diameter, I ordered the assembly from a Long Island boat dealer in Freeport for $98.