PDA

View Full Version : Need some X45 decal measurments.


Hammer
04-04-2014, 07:43 AM
I am changing the graphics on my 45 and need someone with the long Mastercraft down the side to get me some measurement from the rub rail and front to back. A picture or two would not hurt. Thanks in advance for your help!

Hammer
04-04-2014, 07:46 AM
Some thing like this. Just the Mastercraft logo.

scott023
04-04-2014, 08:10 AM
I'll grab it when I'm at the shop later this morning.

scott023
04-04-2014, 11:53 AM
Decals are 63.5x6.

KnoxX2
04-04-2014, 11:58 AM
Scott
I think he wanted to know the measurement from the front of the boat back to where the decal starts and from the rub rail down to the decal in the front and in the back so he can lineup the new one right. Is 63.5 from the front of the bow to the decal?

Hammer
04-04-2014, 12:12 PM
Scott
I think he wanted to know the measurement from the front of the boat back to where the decal starts and from the rub rail down to the decal in the front and in the back so he can lineup the new one right. Is 63.5 from the front of the bow to the decal?

^^^^^^^What he said.

scott023
04-04-2014, 12:13 PM
Dang it. No, that's the decal measurement. I'll head back over there.

Hammer
04-04-2014, 12:14 PM
I am actually going to use a different decal but thought the measurements would help me get it straight. Going with the black one off of the 07 TT boat. Its longer and a bit taller.

KnoxX2
04-04-2014, 12:18 PM
Dang Canadians!!!! Cant follow simple instructions...........JK..........:rolleyes::D

scott023
04-04-2014, 12:37 PM
Dang Canadians!!!! Cant follow simple instructions...........JK..........:rolleyes::D

I know, right?? Lol

It was the first post I read when I woke up... Apparently I wasn't awake enough to read. :o

KnoxX2
04-04-2014, 12:41 PM
Hey, at least its Friday right?

JamesL
04-04-2014, 12:46 PM
It is Friday both here in the US an Canada land. I cant be the only one ready for a drink

scott023
04-04-2014, 12:49 PM
Ok, here they are. Sorry for the delay Hammer.

Rub rail down 8"
Back to decal 109"
Front to decal 110"

Hammer
04-04-2014, 12:58 PM
Ok, here they are. Sorry for the delay Hammer.

Rub rail down 8"
Back to decal 109"
Front to decal 110"

Awesome thanks! So its 8" down from the rail at the front and back?

scott023
04-04-2014, 01:16 PM
Awesome thanks! So its 8" down from the rail at the front and back?

I just measured down to the top of the M. My decal came on a sheet that just rolls onto the side, so I put tape around the original decal to ensure that it's straight when I put the new one back on.

Hammer
04-04-2014, 01:32 PM
I just measured down to the top of the M. My decal came on a sheet that just rolls onto the side, so I put tape around the original decal to ensure that it's straight when I put the new one back on.

My boat didn't have the decal on the side to start with so I had/ have nothing to go by. Making it up as I go along.

Hammer
04-04-2014, 01:35 PM
If its not to much trouble, could you measure from the rub rail to the bottom of the M and from the rub rail to the bottom of the last t. I think that will give me the line I need to go from with the other measurements you gave me.

scott023
04-04-2014, 01:39 PM
If its not to much trouble, could you measure from the rub rail to the bottom of the M and from the rub rail to the bottom of the last t. I think that will give me the line I need to go from with the other measurements you gave me.

I can do that. Do you need it right away?

Hammer
04-04-2014, 01:41 PM
No, I plan on doing it over the weekend. Still have a little more buffing to do on one side.

scott023
04-04-2014, 01:49 PM
Ok, here is what I came up with.

MasterCraft

M is 6.5" from rail
C is 8" from rail
t is 8.5" from rail

Hammer
04-04-2014, 01:51 PM
One last question. Which side of the boat did you measure? Port or Starboard?

scott023
04-04-2014, 01:52 PM
One last question. Which side of the boat did you measure? Port or Starboard?

Port side.

Hammer
04-04-2014, 01:57 PM
Thanks a lot for your help! You are the man. We will see how this goes. May ask for some opinions on a couple things once I get this on. Should finish up the polishing, install the new rub rail, Graphics, and all new gauges. Then off to the upholstery shop Monday.

scott023
04-04-2014, 02:09 PM
Thanks a lot for your help! You are the man. We will see how this goes. May ask for some opinions on a couple things once I get this on. Should finish up the polishing, install the new rub rail, Graphics, and all new gauges. Then off to the upholstery shop Monday.

Sounds good. Have fun with the rest of the polishing. :D