View Full Version : Anyone recognize this dash module?

01-31-2012, 07:10 AM
this is on an 01 X30. is this some type of speed control? thanks.

01-31-2012, 03:49 PM
If you are referring to the large black gauge just right of center, I would say it is an early version of Perfect Pass.

01-31-2012, 04:11 PM
the seller sent me a video, when it powers up it says "mastercraft maristar 230" and looks to be a multifunction display that shows temp, volts, etc as well as being a speed control.

i was really high on this boat until he showed me the spider cracks by the legs of the tower.

01-31-2012, 04:13 PM
how bad are the cracks? I have a ton of minor ones on mine. I wouldn't particularly call that a reason not to buy a boat unless you are super anal retentive.

01-31-2012, 04:24 PM
they aren't terrible. but don't they indicate that the tower was used to tow too heavy of a load and won't they just continue to spread even with only "normal" use.

01-31-2012, 04:44 PM
That could be one reason but not necessarily the only reason.

Mounting too loose, over tightened, impropper hole drilling, etc. Gell cracks are common and happen for many reasons.

01-31-2012, 04:45 PM
so with normal use, would they get worse? i'm about 220lbs.

02-01-2012, 07:58 AM
That is an "Accuski" speed control.

02-01-2012, 08:39 AM
so with normal use, would they get worse? i'm about 220lbs.

Depends if they are cosmetic or structural. More than likely they are cosmetic and I wouldn't worry about it. Pictures?

02-01-2012, 08:42 AM
if this works, here is the video.


i'm not sure how to embed the movie.

02-01-2012, 12:38 PM
Confirmed, that is an accuski gauge. Old technology, and more commonly found on early 90's boats.