PDA

View Full Version : exact dimensions needed


yml
11-22-2011, 07:44 PM
I am in the process of purchasing my first Mastercraft X15. I have looked for dimensions to help me with indoor parking and storage. There have been some posts about it but they are too non specific. This is what I need to know. With the power tower folded down what is the exact height of the X15 on its trailer (within an inch), and what is the width of the boat and trailer (to within an inch). Thx for any help out there.
YL

jason95gt
11-23-2011, 11:13 AM
The width is 100" with the trailer guides off. The height with the windshield is 83" and the power tower adds about 4". Sorry that last one is a little vague.

11-23-2011, 11:23 AM
Very easy to find on the MC website

http://www.mastercraft.com/boats/specification/x15

-V-
11-23-2011, 11:55 AM
Jim,

I don't wanna be "that guy" but it does not give you the measurements of it on the trailer. It only give you the measurement of the boat, unless i read this wrong;

Length: 21' 8"
Length with platform: 23' 9"
Width amidship: 100"
Length with trailer: 24' 4"
Length with sa tongue: 22' 2"
Length trailer single axle: n/a
Length trailer tandem axle: 100"
Weight: 3,575 lbs.
Single axle trailer weight: n/a
Tandem axle trailer weight: 1100 lbs
Fuel capacity: 45 Gallons
Depth transom: 28"
Depth amidship: 32"
Draft: 26.5"
Tow bar height to waterline: n/a
Capacity: 14 Persons or 2,325 lbs.
Model name length: 21'
Boat height: 107" *

* Boat height dimensions reflect height of standard tower to lowest point on keel at a level attitude.

And is the trailer wider than the boat or is the boat wider than the trailer?

yml
11-23-2011, 10:10 PM
Thx, that is what I needed to know.