steering wheel centers

[chunter]

well here is what i made today on the mill at work and i am thinking about selling them for
40ea. if anyone is interested contact me at chunter426@yahoo.com and i will get them going for you. the one i made is for my 1999 PS205 and is billet aluminium.

[Cloaked]

Screws included? Jsut cuious....

I'll get you dimensions for my wheel's bolt pattern tomorrow. Thank you. Looks nice and unique. No one will appreciate having one until their plastic is whacked. Nice touch for looks.

And this offer will not last forever...

.

[agarabaghi]

and they are cheaper than these: http://www.ebay.com/itm/MASTERCRAFT-...item5d2d274c58

I would have bought one has i not wasted $60 on the MC one! doh!

[chunter]

cloaked,
no i did not really think about the bolts those are the ones that were existing on my steering wheel but i can look into the cost of the right ones in stainless.
agarabaghi,
it is still cheaper than anything else you can get for your boat, i think we all can agree on that.

[Cloaked]

Originally Posted by chunter

cloaked,
no i did not really think about the bolts those are the ones that were existing on my steering wheel but i can look into the cost of the right ones in stainless.
agarabaghi,
it is still cheaper than anything else you can get for your boat, i think we all can agree on that.

Excellent. No big deal either way.

Best bet is to use this thread for further information and let the other one die, or get one of the powerful mods to merge, or close....

Thanks for the kind offer.... I look forward to a new gadget....

.

[mikeg205]

chunter - how do you want the measurements for the 5 bolt patter of this steering wheel. the center hole measures 2 3/16 and the distance between screws 1 11/16. But that is measured with cheap tape measure.

Hey cloaked what do you recommend for dimensions on the 5 screw configuration - here's the manufacturer info on the grant steering wheel.

http://64.60.165.189/c-198-how-to-buy.aspx i believe my model is the 3651

http://64.60.165.189/c-198-how-to-buy.aspx

[cwarndahl]

Wow that looks great. how do i get you the measurement or does any one know for a 2001 mastercraft x-10?

[Cloaked]

I would suggest treating it like a tire-wheel hole pattern and measure across on the applicable distances.

I think most of these steering wheels are made to a particular standard for fit. Just a matter of how the rest of the wheel is configured.

That's a good diagram...

[Cloaked]

Originally Posted by cwarndahl

Wow that looks great. how do i get you the measurement or does any one know for a 2001 mastercraft x-10?

He's got an e-mail address in one of two threads (of which the power mods should merge) to send dimensions, requests, etc....

Again, I think most dimensions will be similar or the same. He doesn't care. One of his posts ( http://www.mastercraft.com/teamtalk/...23&postcount=1 ) said send in what you need and he can make it.

Just make sure you provide enough info for the configuration of the plate. I'm just looking at the 5 bolt hole pattern (dimensionally).


.

[CantRepeat]

If the OP request that his appearance thread to be merged with his sale thread to the for sale forum it will be done.

They both serve a purpose. Showing the appearance of the new cover, and one for selling them. But if he ask I'm sure none of the mods would have issue with filling the request.