2013 X2

[nullpointer]

I am looking to buy a new 2013 X2. I test drove it and loved it. Below is the specs

Mastercraft X-2 (2013)
5.7 Ilmor
Surf Tabs
ZFT4 Tower
Pro Package
Proview Mirror
Transom Remote
Fender Clips
Heater
Cover
Bimini
Single Axle Trailer

Is this a fair price? The msrp seems inflated. I really love it just worry as I am completely new to this. The dealer so far has been great and I haven't felt any pressure.

I would really appreciate your insight?

Thanks again in advance, can't wait to be a mastercraft owner!

[wakecumberland]

This time of year with a left over 2013 I would think you should be somewhere around 70% of MSRP so roughly $72,000. Their offer is in the ball park.

[Jcgarwood]

I have a VERY nice 2006 x15 red and white with bullseye graphics and a 350 mcx with 240 hours for sale that is bigger than the x2 and nearly half the money. It doesn't have all the new boat trick but you could add anything you want and still be 10s of thousands ahead. Accessories are fun to add but you can't ad length to the boat. Asking 45, plus i can bundle the boat with tons to gear too. Platform cleaned, sanded, and oiled. Boat has always been dealer serviced and is winterized now. Call if you want more pics or info 5014425371

[Aric'sX15]

why dont you start by posting it in the for sale section and not on a completely different topic

[Thrall]

I wouldn't go a bit over $70k for any X2 regardless of options, personally.
One thing to consider is the trailer. If you're only trailering the boat short distances or it lives on a lift, single axle is ideal, and easier to pivot into a garage by hand. If you're planning on towing alot I would not consider a single axle under a X2 for the long term. The boat is every bit of 4klbs + fueled up and full of gear. If you're running multiple batteries and a bad @ss stereo, keep adding to that weight.

Main thing is when, not if, you pop a tire, the torsion axle tandem will keep the rim on the flat off the pavement and you wont trash a rim.
Otherwise, being new to this as you stated, we love the X2. Great do it all watersports boat with as much room as you can get inside for passengers and storage out of a 20' boat. Handles chop pretty well too.
Also I think they are MC's best selling line of boats which really helps at resale time. You still cannot buy even an 06 model for under $40k unless it's stripped down, high hours or beat up. Good ROI for a 7 going on 8 year old 20' wakeboat.

[Thrall]

Originally Posted by Aric'sX15

why dont you start by posting it in the for sale section and not on a completely different topic

And polish out those fenders too! haha

[gsxrjtt]

nullpointer: just PM ed you

[bamabonners]

I assume you are talking to Rambo Marine. I bought my x2 from them in July. Great folks! Make them trow in a spare tire mount and tire/wheel. I didn't do that for some stupid reason....

[JRW160]

Originally Posted by bamabonners

I assume you are talking to Rambo Marine. I bought my x2 from them in July. Great folks! Make them trow in a spare tire mount and tire/wheel. I didn't do that for some stupid reason....

If he's in murfreesboro, aqua sport is probably his dealer. They are ok to deal with, but not as good as rambo from what I have seen.

[nullpointer]

Thanks everyone for all the advice and information. I did end up getting it from Aqua Sport. So far they have been great to work with and I am loving the boat!