Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > General / Other

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2013, 01:21 PM
reftech reftech is offline
TT Enthusiast
 
Join Date: Aug 2012
Boat: 1987 mastercraft prostar 190
Location: southeast
Posts: 132
Drive shaft log leaking help!!

Hi guys my 87 prostar 190 has a bad leak where the drive shaft log penetrates the hull. Any ideas on how to repair? Has anyone run in to this problem before?
Attached Images
 
Reply With Quote
  #2  
Old 03-06-2013, 05:24 PM
FrankSchwab FrankSchwab is online now
MC Devotee
 
Join Date: Aug 2004
Boat: 1998 Maristar 200VRS
Location: Phoenix, AZ
Posts: 1,443
Well, the normal path for water into the boat there is through the packing around the driveshaft, inside the big-ole brass nut just below and out of your picture. That's a normal maintenance item and easily adjusted. Are you sure the water isn't coming in there?

If it's actually coming through some kind of break in the fiberglass, I can't help you. You'll probably have to get someone knowledgeable to decide if the crack is a structural problem, or something simple that a patch of fiberglass and a spot of resin will take care of.

So, I guess, the first problem is finding exactly where the water is coming in.
__________________
1998 Maristar 200VRS
Reply With Quote
  #3  
Old 03-06-2013, 05:33 PM
mikeg205's Avatar
mikeg205 mikeg205 is online now
Moderator
 
Join Date: Aug 2011
Boat: 1995 Pro Star 205 5.7 Liter
Location: Plainfield - Joliet, IL
Posts: 9,287
Send a message via Skype™ to mikeg205
+1 on Frank's comment.... a video or more specifics where the water is coming in. If it's a bad shaft log it can be replaced. It could be as simple as needing new shaft packing... where is the water intrusion originating? - some water is normal... a few drips per every 10 seconds ok. or you can get a dripless packing.
__________________
...A bad day water skiing still beats a good day at work...1995 Pro Star 205....
Reply With Quote
  #4  
Old 03-06-2013, 06:24 PM
reftech reftech is offline
TT Enthusiast
 
Join Date: Aug 2012
Boat: 1987 mastercraft prostar 190
Location: southeast
Posts: 132
The water is coming in through the fiberglass. I'm very familiar with replacing shaft packing but unfortunately that's not the issue on this one. The boat is at creative fiberglass now (a local shop) and will be ready next week. I'm not a fiberglass guy and figured I would leave it to a skilled hand because we are looking to start skiing in the next couple weeks. I will post pics of the repair when I get it back. Thanks guys!
Reply With Quote
  #5  
Old 03-06-2013, 07:49 PM
tph's Avatar
tph tph is offline
MC Devotee
 
Join Date: Jul 2004
Boat: '83 Metalflake Blue on Grey S&S Powerslot, 351W
Posts: 1,103
Leak

Looks identical to my '89. In my case the solution was to remove all the glass on top of the shaft log, reattach the log to the hull with epoxy and glass over the whole assembly. Took 4 -6 hours and it's been working great for several years.
Reply With Quote
  #6  
Old 03-07-2013, 07:16 AM
reftech reftech is offline
TT Enthusiast
 
Join Date: Aug 2012
Boat: 1987 mastercraft prostar 190
Location: southeast
Posts: 132
Tph that's exactly what has to be done on mine! Thanks for the input man!
Reply With Quote
  #7  
Old 03-07-2013, 08:47 AM
mikeg205's Avatar
mikeg205 mikeg205 is online now
Moderator
 
Join Date: Aug 2011
Boat: 1995 Pro Star 205 5.7 Liter
Location: Plainfield - Joliet, IL
Posts: 9,287
Send a message via Skype™ to mikeg205
re-glass job - not too bad - 4-6 hours? What does that kind of repair cost? Looking forward to after pics.
__________________
...A bad day water skiing still beats a good day at work...1995 Pro Star 205....
Reply With Quote
  #8  
Old 03-07-2013, 12:27 PM
reftech reftech is offline
TT Enthusiast
 
Join Date: Aug 2012
Boat: 1987 mastercraft prostar 190
Location: southeast
Posts: 132
What's up mike!? Haven't heard from ya in a while.. The repair is gonna hit me for 250.00 and that was a big deciding factor for me because I'm currently out of epoxy resin and mat so I would've had a good bit in materials if I bought the west system stuff because they are very proud of it u know. So he says I should have the boat back next week and I will post the repair pics.kinda wish he would send me some progress pics.
Reply With Quote
  #9  
Old 03-07-2013, 12:30 PM
thatsmrmastercraft's Avatar
thatsmrmastercraft thatsmrmastercraft is offline
MC Master Poster
 
Join Date: Sep 2008
Boat: 1977 Stars & Stripes
Location: St. Paul, MN
Posts: 13,855
Quote:
Originally Posted by reftech View Post
What's up mike!? Haven't heard from ya in a while.. The repair is gonna hit me for 250.00 and that was a big deciding factor for me because I'm currently out of epoxy resin and mat so I would've had a good bit in materials if I bought the west system stuff because they are very proud of it u know. So he says I should have the boat back next week and I will post the repair pics.kinda wish he would send me some progress pics.
That doesn't sound too bad.
__________________
Peter

Tandem Axle Trailer Special
Includes: 4 T07 wheels, 4 ST205/75R14 Kenda
Loadstar KR03 Radial tires, mount and balance
Free Delivery


ALUMINUM WHEEL AND TIRE PACKAGES
SINGLE AXLE 14" PACKAGE STARTING AT $369
SINGLE AXLE 15" PACKAGE STARTING AT $439
TANDEM AXLE 14" PACKAGE STARTING AT $649
LED lights, Spare Tire Carriers, Chrome & Powder Coated Lug Nuts
GOLF CART TIRES & WHEELS

PM me or email tiresplease@gmail.com
Reply With Quote
  #10  
Old 03-07-2013, 01:20 PM
reftech reftech is offline
TT Enthusiast
 
Join Date: Aug 2012
Boat: 1987 mastercraft prostar 190
Location: southeast
Posts: 132
Not at all. And I've seen his work. There is a guy on a local lake we ski on that hit a log and ripped his rudder off leaving a huge hole in his hull. This guy repaired it and did a really nice job for 600.00 so I'm optimistic about it.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 12:18 AM.