Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Upholstery

Reply
 
Thread Tools Display Modes
  #1  
Old 03-02-2014, 01:07 AM
JustinE JustinE is offline
TT Newbie
 
Join Date: Apr 2013
Boat: 1996 mastercraft prostar 205 , LT1
Location: Midwest
Posts: 5
Interior panels

How do I get the interior panels off both the drivers side and port side of the walk way to the front bow on my 96 ProStar 205 ? Are they pressed in with plastic clips or bolted ?
Thanks for any help
Reply With Quote
  #2  
Old 03-02-2014, 01:53 AM
mikeg205's Avatar
mikeg205 mikeg205 is offline
Moderator
 
Join Date: Aug 2011
Boat: 1995 Pro Star 205 5.7 Liter
Location: Plainfield - Joliet, IL
Posts: 11,648
Send a message via Skype™ to mikeg205
Here are some pics...

http://www.mastercraft.com/teamtalk/...t=56789&page=2

my 1995 has christmas tree pins for the walk thru when checked last..
__________________
...A bad day water skiing still beats a good day at work...1995 Pro Star 205....
Reply With Quote
  #3  
Old 03-02-2014, 09:09 AM
RoboF16 RoboF16 is offline
TT Newbie
 
Join Date: Aug 2013
Boat: 2000 Mastercraft ProStar 205
Location: Southeast
Posts: 13
First, remove the center section up front – should be held in by five press-in plastic retainers (Christmas tree style). Start with the bottom left and right corners first. I found it helped to have one of those automotive door panel fastener removal tools. Protect the fiberglass with a cloth.
Then, remove speakers so you can start to remove the 7/16 nuts/bolts that hold the side panels on. A ratchet wrench is VERY helpful and if your arms are not too big/long it is manageable. Each side will have one bolt at the very front of the side panel that you access through the hole uncovered by the center seat back. Then start to locate the others you access through the speaker holes. Last, you’ll need to remove the panel in front of the driver’s feet to get to the bolts near the driver and observer. Finally you’ll lift the side panels up, and off of the aluminum brackets attached to the fiberglass. Hope this helps.

Last edited by RoboF16; 03-02-2014 at 10:14 PM.
Reply With Quote
  #4  
Old 03-02-2014, 09:12 AM
RoboF16 RoboF16 is offline
TT Newbie
 
Join Date: Aug 2013
Boat: 2000 Mastercraft ProStar 205
Location: Southeast
Posts: 13
About getting your arms through the speaker holes, etc…
The key is to get your elbow in there, so run your hand through whatever direction that provides the most distance/room to get the elbow through THEN you can go side-to-side searching for the 7/16 nuts.
Reply With Quote
  #5  
Old 03-19-2014, 07:07 PM
Cloaked Cloaked is offline
MC Maniac
 
Join Date: Dec 2004
Boat: MasterCraft
Location: Kingston,TN USA
Posts: 4,602
........
__________________
93 190
.
Don't be a boot licker
.

Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8



Quote:
Originally Posted by Thrall View Post
..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

RE: Thrall, Welcome to the club....
NEW SKINS in TN... Leading Edge Marine Interior

feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

.
Reply With Quote
Reply

Tags
interior panels prostar

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 10:25 AM.