Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Restorations and Refurbishments

Reply
 
Thread Tools Display Modes
  #1  
Old 04-14-2018, 09:08 PM
james_shoemaker james_shoemaker is offline
TT Regular
 
Join Date: Dec 2017
Boat: Mastercraft 1982 351 Powerslot Stars and Stripes
Location: Great Plains
Posts: 58
Transom thickness 1982 Mc.

I'm planning on replacing the lag screws on my swim platform with through bolts and backing plates, but how thick is the transom so I get the right length.

James
Reply With Quote
  #2  
Old 04-15-2018, 07:45 AM
waterlogged882 waterlogged882 is offline
MC Master Poster
 
Join Date: Dec 2004
Boat: 93 190
Location: lake
Posts: 11,972
thanks
__________________
John 3:16-18

Last edited by waterlogged882; 04-16-2018 at 09:40 PM.
Reply With Quote
  #3  
Old 04-15-2018, 01:00 PM
Bama Bama is online now
TT Regular
 
Join Date: Mar 2016
Boat: 81 mastercraft stars & stripes 351w
Location: Central
Posts: 99
I have a fiberglass platform on my 81. I just reworked the platform this past winter. I drilled the the existing holes where the lag bolts where out to 5/8" then I filled the holes with epoxy. Then I drilled those holes out to 3/8" and used carriage bolts with with large fender washers on the back side. I also used rubber grommets between the platform and the transom. I had also did the same with the platform as far as drilling a larger hole and filling it with epoxy. This way if any moisture where to get around the bolts the wood in the platform and the transom is protected.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 06:42 AM.