85 S&S windshield

[Jax50]

Does any one know where I can purchase new bolts and the foam/rubber seal for under the the windshield. Thanks Clayton

[thatsmrmastercraft]

Might get in touch with Taylor - they were the windshield manufacturer. I was just talking about replacing the gasket on my boat.

[Jax50]

Ok, Thanks. I'll give them a shot.

[thatsmrmastercraft]

Post what you find out. I'm sure we aren't the only two looking for this.

[Jax50]

Will do. I didn't find anything on their website. I sent them an email. I'll let ya know what I find.

[Jax50]

Well, Just got a reply from Taylor. They advised their records do not go back as far as 85 and that if I had a cross cut of the gasket they may be able to find something close. No luck on the bolts.

[79 S@S rda]

For the bolts just get some of the same size in stainless and grind the heads into the same shape and size as the channel that is what I did worked great.

[thatsmrmastercraft]

Originally Posted by 79 S@S rda

For the bolts just get some of the same size in stainless and grind the heads into the same shape and size as the channel that is what I did worked great.

I did the same. I think I used pan head screws as they fit best into the channel.

[Jax50]

Thanks guys. I will give that a try.