Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Ballast

Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2012, 06:58 AM
jafo9's Avatar
jafo9 jafo9 is offline
MC Fanatic
 
Join Date: Jan 2011
Boat: 2002 X30 LTR
Location: Southeast
Posts: 716
weighting an 02 X30 with attitude plate

so here's my setup. 02 X30. hard tanks removed and replaced with a 750# bag in each locker. stock KGB bag. 3 jabsco (smaller size) pumps running off OEM manifold setup through 1 thru-hull fitting. i've got an attitude plate and the high altitude prop with the LTR. I've seen lots of X10/210 and X30/230 ballast threads, but none mention the effect if any of the attitude plate beyond helping with proposing at higher speeds.

I'm interested in your opinion for the following 3 scenarios:

1. Smallest wake possible for beginners/kids

2. Decent wake for intermediate riders

3. Surf wake

We've only been out once with the boat and found a decent low intermediate wake with the port rear about 1/3 full, KGB full and some downward trim. We haven't tried to surf yet but i just ordered a '12 inland surfer squirt that hopefully the whole family can use.

I'd love to hear your opinions about how you'd run this boat for the above scenarios including how you'd set the attitude plate. Thanks.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 01:21 AM.