i could use a pic from an x1/205v etc

[SWeaver]

Can somebody post a quick pic of either rear ballast pump location. I know they're on the transon behind that carpeted wall, but when i looked at my 205v, i saw a couple spots where they could be mounted, so a pic of a stock mount would be very helpful. Also, any idea how long the mounting screw is? I'd prefer not to poke out the other side. Thanks!

[G-Star]

I've got some I can post up tomorrow morning.
I'll subscribe so I remember

[SWeaver]

Thanks so much! I knew somwbody would come through.

[tommcat]

Originally Posted by SWeaver

Can somebody post a quick pic of either rear ballast pump location. I know they're on the transon behind that carpeted wall, but when i looked at my 205v, i saw a couple spots where they could be mounted, so a pic of a stock mount would be very helpful. Also, any idea how long the mounting screw is? I'd prefer not to poke out the other side. Thanks!

Just use a really long screw and cut off the extra when it comes out the other side

[G-Star]

K... here we go. Port, starboard, and everything.
You can see the thick area extends below the thru-hull bolts for the transom rings. That's where the 4 ballast pump screws go. I can't remember what length the screws were though. I guess you could pull out the transom ring and measure thickness?

[G-Star]

Some detail shots of the pumps.

[SWeaver]

Perfect. Thanks.

[rem_pss308]

G-star thanks for the pictures I too was needing some. Was there a plate or panel in front of the pumps that hide it from the storage area? or are the pumps seen just as they are?

I have a 1999 and I dont have a panel there. But hope to put my pumps there.

How do they work being up so high from the water line?

[rem_pss308]

can you take a picture of your thru hull where they get water ?

is there a valve at the thru hull?

[agarabaghi]

Originally Posted by rem_pss308

G-star thanks for the pictures I too was needing some. Was there a plate or panel in front of the pumps that hide it from the storage area? or are the pumps seen just as they are?

I have a 1999 and I dont have a panel there. But hope to put my pumps there.

How do they work being up so high from the water line?

My 06 x1 has a panel that screws in to those black rectangles on the floor in his picks, im assuming his does too... i would not leave them exposed wit hthe pressure of the fatsac leaning on them.