Adding fat sacks

[CantRepeat]

Originally Posted by ShamrockIV

on mine the tanks are high on the gunnels and the sacks i am adding wil be lower on the floor beside them. i took some pix. i will post when i finish tonight

If the sacs are below the hard tanks you might have some issues when trying to empty them, Sham.

With the way you say you have it plumbed, it would seem hard for the pump to pull water from the sac back UP into the hard tank and then empty out.

[ShamrockIV]

i will post pics tonight. they are not really lower. just where they are empty they look it if that makes sense.

[ShamrockIV]

the sacks filled and emptied with no issues!!!

this is def the way to go.

[DBrown2]

Sham post pics .. sounds like my X10 is setup same way this would b a nice and easy edition on a few hours.

[ShamrockIV]

i will post some tonight D. i got to finish cleaning the boat up from the weekend. i was a really easy install!!

[ShamrockIV]

here come the pix. i will do my best to tell u what they are. tell me what else u guys need and i will take them!!

[ShamrockIV]

here is the starboard compartment before i started. see the hard tank is way over on the gunnel

[ShamrockIV]

here is a better view of the starboard compartment before i started

[ShamrockIV]

this is the hose that leads to the outside of the boat. this is the one that i removed from the hard tank and connected to the drain of the fat sack. i replaced the pipe from the hard tank to the top of the fat sack and the job was complete. i have a good pic of the other side where u can see what i mean. it will be up in a min

[ShamrockIV]

here is the port bag installed
the black hose is the one from the top of the hard tank.