Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > General / Other

Reply
 
Thread Tools Display Modes
  #1  
Old 07-13-2012, 11:35 AM
surfacetension surfacetension is offline
TT Enthusiast
 
Join Date: Aug 2007
Boat: 2007 mastercraft X 2 350 mxc
Location: Northeast
Posts: 230
07 x2 should I be worried about my fuel pump?

I have an 07 X2 with only 130 hours on it I going for a 1 week vacation, should I be worried about the fuel pump? I never run it below 1/4 but I seethat it's a very common failure. also what is the Napa part Number? I may just buy one and throw it under the seat
__________________
2007 X2 Slider MCX It's Orange and white
Reply With Quote
  #2  
Old 07-13-2012, 11:40 AM
TN X-45's Avatar
TN X-45 TN X-45 is offline
MC Fanatic
 
Join Date: Apr 2010
Boat: Mastercraft X-45 2008 MCX
Location: Southeast - Allatoona
Posts: 531
You should be good until about 300 hours - seems to be the MO
Reply With Quote
  #3  
Old 07-13-2012, 11:48 AM
CantRepeat's Avatar
CantRepeat CantRepeat is online now
 
Join Date: Jul 2008
Boat: 06 X30
Location: Roll Tide!!
Posts: 8,488
Search for fuel pump should yield the fuel pump thread with part numbers and how tos.
__________________
Tim
Gone, surfing.
Reply With Quote
  #4  
Old 07-13-2012, 11:55 AM
jmw jmw is offline
TT Enthusiast
 
Join Date: Apr 2012
Boat: 2009 214V
Location: Northeast (DC area)
Posts: 122
Here are a couple of the most common part numbers but it seems several will work. It's impossible to know when it will go out.... I would not replace until it goes out but if your worried pick up a spare pump and have the tools to change it at the lake.

Napa AC Delco EP356
Also Airtex E2044
Reply With Quote
  #5  
Old 07-13-2012, 12:00 PM
surfacetension surfacetension is offline
TT Enthusiast
 
Join Date: Aug 2007
Boat: 2007 mastercraft X 2 350 mxc
Location: Northeast
Posts: 230
Thanks , I think I'll just throw one under the seat just in case, thanks again for the info
__________________
2007 X2 Slider MCX It's Orange and white
Reply With Quote
  #6  
Old 07-13-2012, 12:46 PM
moleson10's Avatar
moleson10 moleson10 is offline
TT Enthusiast
 
Join Date: Aug 2007
Boat: xStar, 2008, LY6
Location: Northwest
Posts: 164
Seems like the problems happen after you run your tank dry. That was my experience. If you've not done that you're probably OK.
Reply With Quote
  #7  
Old 07-13-2012, 01:26 PM
willyt's Avatar
willyt willyt is offline
MC Devotee
 
Join Date: May 2009
Boat: ER xstar
Location: high in the middle and round on both ends
Posts: 1,877
make sure you get the tool for taking off the fuel line

i just replaced mine, did it while the boat was in the water with tools on the boat. its really NBD
Reply With Quote
  #8  
Old 07-13-2012, 02:53 PM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 613
what tool do you need for the fuel line?
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Reply With Quote
  #9  
Old 07-13-2012, 03:13 PM
TN X-45's Avatar
TN X-45 TN X-45 is offline
MC Fanatic
 
Join Date: Apr 2010
Boat: Mastercraft X-45 2008 MCX
Location: Southeast - Allatoona
Posts: 531
I never ran mine low on gas and lost it at 345. I also did not need the tool to remove the gas line - I was able to get it out and changed without it.
Reply With Quote
  #10  
Old 07-13-2012, 03:38 PM
MattsCraft's Avatar
MattsCraft MattsCraft is offline
MC Devotee
 
Join Date: May 2008
Boat: 2013 X25 - 6.2 Ilmor Baby
Location: Cincinnati, OH
Posts: 1,084
Here is the simple tool you need.

http://www.toolsource.com/scissor-di...-p-107887.html
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:48 AM.