Graphics coming off....

[onejdgreen]

A couple of the letters in the MasterCraft are starting to come loose on my boat, not cool.... What should I use to re-attach them? Super glue, gorrilla glue, what???

[TLR67]

Take them off and get new decals....

[onejdgreen]

Originally Posted by TLR67

Take them off and get new decals....

I was hoping for a cheaper fix than that....

[TLR67]

I wouldnt advise glue..

[mccobmd]

You might try emblem adhesive that they use for car emblems. It is at least safe for clear coat finish

[jkski]

Can you post a photo of the letters? I saw in your profile that you have an 02 TT listed, so the letters are typically a bit larger than the normal PS197. With that said, I had an issue with a couple of letters coming off of my 02 and had them replaced ,leaving me with a few extra letters. If they match-up to yours you can have them for the cost of shipping.

[broncotw]

I would contact Jim at Bay Area Water Sports (BAWS).... I know he has the hook ups on decals.....

Jim Kranendonk
Bay Area WaterSports
(813) 996-BAWS (2297)

[norris_ps205]

Same thing happened to mine...I went ahead and had the whole decal replaced. Just an FYI...if you have a bumper hanging against them when you are docked, that's probably what is tearing them off. Put a bumper sleeve on it and you won't have the problem again.

[onejdgreen]

Originally Posted by jkski

Can you post a photo of the letters? I saw in your profile that you have an 02 TT listed, so the letters are typically a bit larger than the normal PS197. With that said, I had an issue with a couple of letters coming off of my 02 and had them replaced ,leaving me with a few extra letters. If they match-up to yours you can have them for the cost of shipping.

Here is a pic of the decals, prior to coming off... The "M" is still there but is starting to come off. I have lost the "T" completely in the Master. They guy I bought the boat from gave me some extras, he must have had the same issue at some point. I will have to look for them tonight when I get home, but I think I have "T" but not an "M". Let me know what you have.

[jkski]

Originally Posted by onejdgreen

Here is a pic of the decals, prior to coming off... The "M" is still there but is starting to come off. I have lost the "T" completely in the Master. They guy I bought the boat from gave me some extras, he must have had the same issue at some point. I will have to look for them tonight when I get home, but I think I have "T" but not an "M". Let me know what you have.

I looked at what have and it is exactly as follows: MasterCraf (obviously I used the final t).
Take a quick measurement of your M as mine measures about 6 inches in height as it was from a non-TT PS197. Hope they work for you, as it appears to be a match otherwise.
Let me know.