Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > General / Other

Reply
 
Thread Tools Display Modes
  #1  
Old 07-02-2005, 11:52 AM
Dave R Dave R is offline
TT Newbie
 
Join Date: Sep 2004
Boat: 2004 X30 MCX
Location: Jacksonville FL
Posts: 6
Tower speakers inop

I have no output from the clarion head unit to the rear (tower ) amp. If I swap outputs on the back of the head unit, the tower speakers work fine. So I know the problem is with the head unit. I've done the processor reset, checked fuses and all settings, fade, balance etc. I have an 04 X30. Anything I'm missing before I pull it and send it in for repair?
Reply With Quote
  #2  
Old 07-05-2005, 08:00 PM
Andyg's Avatar
Andyg Andyg is offline
MC Devotee
 
Join Date: Jul 2004
Boat: 2008 PS197 LY6
Location: WI
Posts: 1,079
The output for the rear channel is defaulted for a subwoofer so it is not a full frequency signal. Everytime the battery is disconnected it resets it to the default. Your manual should have section on how to make the rear output a full frequency signal.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 02:12 AM.