Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > General / Other

Thread Tools Display Modes
Old 05-27-2010, 06:24 PM
Sidewinder Sidewinder is offline
TT Regular
Join Date: Oct 2008
Boat: Sidewinder
Location: Nova Scotia, Canada
Posts: 92
Line-X and 3M 4200

Do any of you know if Line-X and 3M 4200 are compatible?

Long story short, I rebuilt my fiberglass swim platform for my '79 Skier and am going to get it Line-X'ed, but would like to seal it to the transom with 4200 or something similar in addition to using the factory lag bolts and thru-bolting / adding a backing plate on some of the bolts. Thought about gel coating it again, but it require totally removing the corners and reshaping a lot of it as a previous owner had obviously docked by feel a few too many times - that and I got tired of almost falling into the marina a few time while putting the cover on!

Anyway, I've been in contact with the local Line-X rep and they're not sure so we're going to do a test patch on a scrap piece of Line-X'ed material and see what happens.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 06:13 PM.