header |
|
#1
06-02-2009, 10:02 AM
|
||||
|
||||
|
steering cable or something else......?
Well I decided not to sell the boat
 ; So u might see a few threads pop up since I want to get everything in tip top shape. Steering cable.......this is my first inboard, I never even drove another one besides mine, so Im not sure If i need to replace my steering cable? When Im driving and I let go the wheel, it pulls to the right, It pulls really hard the faster I go. Also the faster I go, the harder it is to turn left, is this the steering cable or could it be someting else???
|
|
#2
06-02-2009, 10:13 AM
|
||||
|
||||
|
The pulling to the right is normal. If you don't like it, you can file one side of the rudder to get rid of that. Search around, there are a few threads on it.
The steering being stiff is probably the steering cable depending on how still. Grease the rudder and lube the cable to see if that helps first.
__________________
Lots of power is good, more is better, too much is just right.  '91 prostar 190
|
|
#3
06-02-2009, 10:15 AM
|
||||
|
||||
|
Look at your rudder, if it looks like someone shaved down one of the back edges that would explain it pulling one direction.
Some guys do this so there is a constant pressure on the wheel when you are trying to drive a straight path. It make it easier to keep a nice straight line when you have a skier/boarder pulling you all over the place. It don't think a bad steering cable would cause any kind of pulling, it would just make steering more difficult in all directions.
__________________
94 Prostar 190, LT-1, Powerslot 
|
|
#4
06-02-2009, 10:23 AM
|
||||
|
||||
|
Here is the thread I was thinking of if you don't want it to pull anymore
http://mastercraft.com/teamtalk/show...0&postcount=12
__________________
Lots of power is good, more is better, too much is just right. '91 prostar 190
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
