Not tooo good of a day at new lake

[TheOneandOnly]

We hit a rock today unloading the boat Wont be going to that lake again, anyways notice that two of the propellers are bent a little no chunks taken out. As I looked at the fiberglass above it I noticed a little chunk about 1/2 by 1" long taken out. It didnt go more than 1/8" deep, I can see like mesched gray fiberglass. I looked at the strut and am puzzled since the prop is easily 2" under the bottom fiberglass. Has anyone had this problem before, What can I do to fix the fiberglass.

FYI-Boat is an 08 x2 I never noticed the little chunk taken out, then again I never really looked under the boat-

[KnoxX2]

I am sure it was from the rock hitting the boat. I would call Eric at OJ on Monday and send him some Pics of the prop. As for the fiberglass I would check with your dealer and see who the recommend in your area to repair the gel-coat! Sorry about the bad day!

[TMCNo1]

Sorry about the bad day, must be a trip to tear up 2 props in one day!
Eric, your phone is ringing!

[TheOneandOnly]

Thanks Guys- I will be in contact with the pros hopefully it wont be too expensive.