Glove box strut

[TOO-TALL]

I'm looking for the gas strut that holds the glove box lid open on a 2003 x2. Mine lost its charge.I looked at autozone ...no dice.
I bet Mastercraft wants a arm and a leg for one so I thought I would try here first.

[99xstar]

Actually these are reasonable at a dealer. Check mymastercraft.com

[TOO-TALL]

Your right...Thanks

[rspiecha]

Look at the labeling on the strut. Go to the manufacture site and cross reference to NAPA and get strut. Worked on my 1994 Prostart 205.

Rob

[TOO-TALL]

Originally Posted by rspiecha

Look at the labeling on the strut. Go to the manufacture site and cross reference to NAPA and get strut. Worked on my 1994 Prostart 205.

Rob

I went to NAPA.....They looked in there charts and Vola picked it up today and installed it.... works perfect.
It was alittle more then the MC dealer(if you can believe that)but since my MC dealer is 45 minutes away it all evened out.


Thanks

[Jesus_Freak]

Excellent. I have three struts to replace in the spring. This has helped!