Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 06-15-2017, 04:12 PM
[email protected] lbdurnal@gmail.com is offline
TT Newbie
 
Join Date: Jun 2016
Boat: 2003 X2
Location: Southwest
Posts: 3
205V Bow Filler

I have an 03 X2. Does anyone have or can easily get the dimensions of the support plate for the bow filler cushion? I'm thinking of DIYing it and having a cushion made by a shop. Any help would be great, thanks!
Reply With Quote
  #2  
Old 06-15-2017, 04:19 PM
MI_Corey's Avatar
MI_Corey MI_Corey is offline
MC Devotee
 
Join Date: May 2013
Boat: 2008 X1
Location: Michigan
Posts: 1,051
I have the factory support plate that I bought in case I decide to have cushion made. I can get a picture and some dimensions for you but it will be a little while. We had a house fire on Monday so it is in contents collection right now being cleaned and sorted. When I get things back, I could help.
Reply With Quote
  #3  
Old 06-15-2017, 07:00 PM
Table Rocker's Avatar
Table Rocker Table Rocker is offline
MC Devotee
 
Join Date: Oct 2010
Boat: '96 ProStar 205, Sammy Duvall, LT-1
Location: Fayetteville, Arkansas
Posts: 2,416
Quote:
Originally Posted by MI_Corey View Post
I have the factory support plate that I bought in case I decide to have cushion made. I can get a picture and some dimensions for you but it will be a little while. We had a house fire on Monday so it is in contents collection right now being cleaned and sorted. When I get things back, I could help.
Sorry to hear about your fire. I cannot imagine how difficult it must be.
__________________
'96 ProStar 205 SD LT-1
Reply With Quote
  #4  
Old 06-15-2017, 07:13 PM
DavidF DavidF is offline
MC Devotee
 
Join Date: Feb 2016
Boat: MC X30 2008
Location: Midwest
Posts: 1,543
does it sit on a "ridge" around the seat "bottoms" or do you need to install small plastic pieces to hold it in? I ask because I have the seat filler for my X30, and the cushion, but I had to drill in 3 inch x 1 inch "thingies" to place it on. Either way, you could try taking a large piece of cardboard and making a template, then go by some pde or whatever that cutting board stuff is made out of, and use that with the template. Then you can go get a pad made. I think the things I used to hold the platform up were seat stoppers or something akin to that.
__________________
08 X30
Reply With Quote
  #5  
Old 06-15-2017, 07:14 PM
DavidF DavidF is offline
MC Devotee
 
Join Date: Feb 2016
Boat: MC X30 2008
Location: Midwest
Posts: 1,543
I used these thingies

https://www.mastercraft.com/teamtalk...ad.php?t=75484
__________________
08 X30
Reply With Quote
  #6  
Old 06-16-2017, 04:45 PM
[email protected] lbdurnal@gmail.com is offline
TT Newbie
 
Join Date: Jun 2016
Boat: 2003 X2
Location: Southwest
Posts: 3
I need to drill the support brackets on one end and it rests on the cup holders at the other end. I was wanting to get the dimensions so I could go ahead and order the starboard (not sure how big I need). My boats in dry stack right now.
Reply With Quote
  #7  
Old 06-23-2017, 02:19 PM
JRW160's Avatar
JRW160 JRW160 is offline
MC Devotee
 
Join Date: Mar 2008
Boat: 2003 X2
Location: Huntsville, AL
Posts: 1,386
I just cut a piece of 1/2" hdpe to sit on the seat base just under the cushions. I didn't want to bother installing the support brackets. Made a cardboard template and had a local shop make hte cushion for $75 a few years ago.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 03:53 AM.


2018