Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 11-08-2018, 01:26 PM
Robust197 Robust197 is offline
TT Newbie
 
Join Date: Sep 2018
Boat: Prostar 190
Location: BC
Posts: 3
Smile Looking for measurements off a 91-94 Prostar

Hey Guys, First time poster, long time lurker. I just purchased my first boat, and yes its a prostar 190!! I settled for a 98 because it was a smoking deal, but I've always wanted a 91-94... SO! I thought I'd do a throwback tribute to the 91-94 prostars with my 98 decals

I am looking for a few measurements on the gel coat and decals:

1) The width of the main gel coat colour. (that has the MC decal in it) (measurement taken at the side of the boat where the MC decal is)

2) The width of both pinstripes below the main gel coat coloured strip

3) The width of the side of the boat itself from the bottom of the rub rail to the first chine (basically where the waterline sits)(measurement taken from the side of the boat where the MC decal is)

4) The height of both colours above the rub rail (there is the main colour, and then a pinstripe on top of that.

5) The height of the Master Craft decal itself on the side.

This info would be greatly appreciated, and I will reward you guys with photos of my restoration job when it's complete.

Thanks!
Reply With Quote
  #2  
Old 11-08-2018, 02:12 PM
Double D's Avatar
Double D Double D is online now
MC Addict
 
Join Date: Sep 2004
Boat: 2008 X14, w/ LY6 400HP w/ 1.22 Ratio Tran
Location: UCLA (Upper Canton, Lower Akron)
Posts: 6,625
Congrats on the purchase. I cant help with the measurements since I recently sold my classic 94, but I do want to see how it comes out.
__________________
If its not a competition ski boat, its always second best.

2008 MasterCraft X14, LY6, 400 HP
1994 MasterCraft ProStar 205 (SOLD)

Check out the MasterCraft Buckeye Bash on Facebook!



"In my many years I have come to a conclusion that one useless man is a shame, two is a law firm and three or more is a congress." - John Adams
Reply With Quote
  #3  
Old 11-08-2018, 02:54 PM
88 PS190 88 PS190 is offline
MC Maniac
 
Join Date: Aug 2005
Boat: 1988 MC Prostar 190, 351 Ford
Location: Midwest
Posts: 4,415
Send a message via AIM to 88 PS190
Usually it is better to scale to the boat then to replicate the original dimensions.

Ive seen that where the older graphics were installed on newer boats and they look too small.
Reply With Quote
  #4  
Old 11-09-2018, 03:41 AM
Robust197 Robust197 is offline
TT Newbie
 
Join Date: Sep 2018
Boat: Prostar 190
Location: BC
Posts: 3
Thanks! I'll maybe give that a try.
Reply With Quote
  #5  
Old 11-09-2018, 03:51 AM
Robust197 Robust197 is offline
TT Newbie
 
Join Date: Sep 2018
Boat: Prostar 190
Location: BC
Posts: 3
That is a good idea, however, I'd like to start with the proper measurements so I can scale it accordingly if need be. I want it looking as original as possible.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 12:38 AM.


2018