Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Audio/Stereo

Reply
 
Thread Tools Display Modes
  #1  
Old 05-29-2015, 02:18 PM
kellett5261 kellett5261 is offline
TT Enthusiast
 
Join Date: Apr 2014
Boat: 1993 Prostar 190; 1991 Barefoot 200; 1989 Sanger OB
Location: Coast
Posts: 174
Fusion Radio in a 93' ProStar

This was my solution for my radio never getting wet again.

I took the original radio housing and made a cardboard templates for the front and back side you just make the same size for now (Note it will need trimming to fix because of the steering helm)

Then pick out the fusion radio you want ( I used the RA-50 Fusion) then centered my radio & cutout my holes for the radio in both the new pieces.

The front plate is 1/8 thick piece of aluminum and the back side you cant see is a 1/4 piece of aluminum. I placed the radio in the 2 pieces I cut out and lined everything up and marked my holes to (sand witch the radio to the dash).

all the screws that are holding the radio in place are behind the 2 tabs on the radio, because the back bracket is thick enough I tapped it for the proper screw size so there is no need to hold a wrench or socket on the back side.

its a very clean look, I just need to paint it black now and it will be complete
Attached Images
 
__________________
1993 ProStar 190 351 Windsor
Red White & Blue
4x 7.7 JL , 10in JL sub
44.3 MPH

1989 Sanger O/B 1990 Yamaha 225
Grey & Blue
Pro X Series Tower w/ Super Fly High

1991 Barefoot 200 1996 Mercury 200 EFI
Black & White
63 MPH (GPS Speed)

SOLD
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 08:48 AM.


2018