Go Back   TeamTalk > General MasterCraft Topics > Watersports > Wakesurfing

Reply
 
Thread Tools Display Modes
  #1  
Old 05-12-2017, 12:57 PM
wickerpepper wickerpepper is offline
TT Newbie
 
Join Date: May 2016
Boat: 2007 Mastercraft x45 400hp
Location: Southeast
Posts: 8
2007 x 45 Wake Shaper

I have been researching wake shapers for the x45. The hull design seems to limit the wakeshapers that will work. Before I pull the trigger, I wanted to make sure that I was aware of all that would work. I understand that a lot of people make them, but time is an issue for me so I would like to purchase one made. It seems the two that will work are the Eight. 3 Ronix wake shaper and the wake-shaper wake shaper that is mentioned in some other posts. Any others that will work on the x45 that I am missing?

Thanks,
John

wakeshaper
Reply With Quote
  #2  
Old 05-12-2017, 10:41 PM
jon_thornton jon_thornton is offline
TT Enthusiast
 
Join Date: Aug 2015
Boat: MasterCraft X45 2010 LY6
Location: Lynn Ranch
Posts: 327
Get the bobv5. Used it on my x45 with amazing results. Cups small enough to fit in the ideal position, all the way back under the lowest chine.
Reply With Quote
  #3  
Old 06-04-2017, 09:34 PM
wickerpepper wickerpepper is offline
TT Newbie
 
Join Date: May 2016
Boat: 2007 Mastercraft x45 400hp
Location: Southeast
Posts: 8
Update. The wake is on point. Added piggyback ballast in both rear lockers and in the front. All easy kits that I purchased to attach to hard tanks already in boat. Finally had a chance to use the BOB V.5 added and the wake is perfect. If you have an x45 the Bob v.5 works great on the stepped hull.
Reply With Quote
  #4  
Old 06-04-2017, 09:47 PM
cwarndahl's Avatar
cwarndahl cwarndahl is offline
MC Devotee
 
Join Date: Dec 2011
Boat: X-45 finally better then x-10
Location: Austin, TX
Posts: 1,436
Post some pics?


Sent from my iPhone using Tapatalk
__________________
2012 MC X-25
Reply With Quote
  #5  
Old 06-06-2017, 09:29 AM
Papermaker Papermaker is offline
TT Newbie
 
Join Date: Aug 2016
Boat: 2005 X45
Location: Nw
Posts: 11
Where did you find a Bobv5? I've got a '05 x45 and have the same issue finding suction cups that will fit! Curious to check this out. Did you order or was it a DIY? Sorry if this was discussed in more detail in a prior post. Cheers!
Reply With Quote
  #6  
Old 06-12-2017, 10:57 PM
wickerpepper wickerpepper is offline
TT Newbie
 
Join Date: May 2016
Boat: 2007 Mastercraft x45 400hp
Location: Southeast
Posts: 8
Picture of x45 wave

Here is one picture. Not a great one but my son is riding a very slow board and plenty of push and size on the wave.
Attached Images
  
Reply With Quote
  #7  
Old 06-22-2017, 01:51 PM
tvb tvb is offline
TT Newbie
 
Join Date: Jun 2017
Boat: 2007 x-30
Location: west
Posts: 3
where can i buy a bob v5?
Reply With Quote
  #8  
Old 06-22-2017, 01:52 PM
tvb tvb is offline
TT Newbie
 
Join Date: Jun 2017
Boat: 2007 x-30
Location: west
Posts: 3
and does it also work on a 2007 x-30?
Reply With Quote
  #9  
Old 06-25-2017, 12:54 AM
wickerpepper wickerpepper is offline
TT Newbie
 
Join Date: May 2016
Boat: 2007 Mastercraft x45 400hp
Location: Southeast
Posts: 8
the forum name for the guy selling them is bet_on_black Send him a private message and he will be in touch as to what boat it works for and cost etc.
Reply With Quote
Reply

Tags
surf, wakeshaper, wakesurf

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 11:34 AM.


2018