Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Storage / Winterization

Thread Tools Display Modes
Old 10-18-2013, 01:22 PM
tim in wisc tim in wisc is offline
TT Newbie
Join Date: Oct 2013
Boat: 2000 x star
Location: Wisconsin
Posts: 7
Hose size for LTR raw water pump inlet


I'm planning to inspect/purchase a 2000 model with an LTR. I would like to make an "engine filling" bucket to flush the engine and fill with RV antifreeze for the 900 mile trip home. If all goes well after the test ride, it should be a quick deal and I will need to be back on the road.

So, can somebody verify the inlet hose diameter? Is it 1" heater hose?

When I get it home, I will do a proper drain, but I don't want to make the trip from the north east to the midwest with only water in the cooling system, trans cooler, low spots, etc. and worry about having missed a drain area on an engine/system that is new to me.

Thanks in advance.

Reply With Quote
Old 10-18-2013, 01:34 PM
Tristarboarder's Avatar
Tristarboarder Tristarboarder is offline
MC Devotee
Join Date: Aug 2012
Boat: 2002 Xstar
Location: Northwest
Posts: 1,276
Super easy to drain. pull 2 hoses on the exhaust manifolds, drain. Pull the engine block plug starboard side, clean hole in block to remove any sediment etc, drain. Remove knock sensor on block port side, remove plug, clean hole for sediment, drain. Pull hoses on both sides of water pump, drain. Lower hose from the starboard side that connected to the pump housing, drain. Pull plugs in hull 1 center, 1 rear by prop) depending on model. Drain bilge as you drive on down the road. Easy, no mess, no work when you get home.
Reply With Quote
Old 10-18-2013, 02:01 PM
mikeg205's Avatar
mikeg205 mikeg205 is offline
Join Date: Aug 2011
Boat: 1995 Pro Star 205 5.7 Liter
Location: Plainfield - Joliet, IL
Posts: 17,130
Send a message via Skype™ to mikeg205
raw water pump s/b 1.25 I.D.
...A bad day water skiing still beats a good day at work...1995 Pro Star 205....
Reply With Quote
Old 10-18-2013, 07:18 PM
alfie623's Avatar
alfie623 alfie623 is offline
TT Enthusiast
Join Date: Jul 2013
Boat: Mastercraft, Maristar, 1999, 330 LTR
Location: New York
Posts: 111
Key term there is ID!
'99 Maristar 210 VRS with 330 LTR
Reply With Quote
Old 10-20-2013, 03:52 PM
madcityskier's Avatar
madcityskier madcityskier is offline
MC Devotee
Join Date: Sep 2008
Boat: 85 Stars&Stripes, safe-t-top, trick realease, boom, flitepipe pylon
Location: madison, wi
Posts: 1,988
What about taking off the inlet hose and running it to flush out the water with your an it freeze? Should do everything you need.
I spent most of my money on booze, broads and boats. The rest I wasted. - Elmore Leonard
I had always thought that there was nothing quite so sad as an abandoned boat.-Terry Hayes
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 07:36 PM.