Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Ballast

Reply
 
Thread Tools Display Modes
  #11  
Old 08-19-2016, 03:08 AM
willg willg is offline
TT Enthusiast
 
Join Date: May 2013
Boat: 02 X-Star
Location: Northeast
Posts: 200
The problem has to be in the wiring behind the switch if the pump runs in one direction. Reach back behind the armrest with the switch emptying (the direction that won't work) and jiggle the wires for the switch and see if it comes on. I had this happen a few times on my boat.
Reply With Quote
  #12  
Old 08-19-2016, 03:13 AM
willg willg is offline
TT Enthusiast
 
Join Date: May 2013
Boat: 02 X-Star
Location: Northeast
Posts: 200
This is how the pump/switch is wired.
https://www.wakemakers.com/resources...pump-switches/

If the wiring isn't the problem, it's the switch. Very standard DPDT rocker switch. Used on almost all boats. The cover that says "ballast" pops off and you can swap it over to the new switch
http://www.mouser.com/ProductDetail/...FhI0eXBA%3d%3d

Last edited by willg; 08-19-2016 at 03:23 AM.
Reply With Quote
  #13  
Old 08-19-2016, 02:49 PM
Canadianwake Canadianwake is offline
TT Newbie
 
Join Date: Jul 2016
Boat: 04 x2
Location: Ottawa Ontario
Posts: 29
Thanks for all your help guys, I am back at my boat next week so I will try checking voltage with a multimeter, then I will try checking out the wires and popping the switch cap off. is there enough room to see the wires behind the arm rest? or is it just a do by feel thing?
Reply With Quote
  #14  
Old 08-20-2016, 08:58 AM
wheelerd's Avatar
wheelerd wheelerd is offline
MC Devotee
 
Join Date: Dec 2007
Boat: 2005 X2
Location: Central Alberta, Canada
Posts: 1,871
Once the switch cover is off -- do this gently to avoid breaking it -- you should be able to pop the switch out of the panel. There are two small friction tabs that secure it. Squeeze these and the switch will pop out. Then you will have access to the connections on the back of the switch.
__________________
2005 X2, Viper Red, MCX, OJ TZ-X5 prop, PPass, rear 750 sacs, KBS, IBS, Bennett Wake Plate, custom wake shaper
(previous) 2001 X5, 1991 TriStar 190
Reply With Quote
Reply

Tags
205v, ballast pumps, x star

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 05:10 PM.


2018