|
#11
05-09-2013, 04:46 PM
|
||||
|
||||
|
ok, i get it now. i am still waiting on UPS they are not really worried about time frame around here for some reason. also the u-bolts that i am getting are supposed to come with nuts and washers. i will be out of town for 2 weeks but when i get back i will get this all done and take some pictures.
|
|
#13
05-10-2013, 06:06 PM
|
||||
|
||||
|
U bolts from Grainger were just zinc plated, I would go with stainless. Here is the ones I sell: https://www.mscdirect.com/product/82687955
Same specs 2" wide 3/8-16 thread.
|
|
#14
05-10-2013, 09:15 PM
|
||||
|
||||
|
the ones I got are 9/16 thread and are not stainless but really how often is the trailer in the water. I saw those and I did not trust the 3/8-16 size, nothing against what you sell.
|
|
#15
05-14-2013, 11:39 AM
|
||||
|
||||
|
well here is a better option than having them made.
https://caltrailerworks.com/online/p...&cat=43&page=1
|
|
#16
05-14-2013, 12:41 PM
|
|||
|
|||
|
another option is to buy the lifting blocks and u-bolts from california trailer. I tried to find springs with different height but could not readily find any so I bought new springs with same curve as original which gave it a little lift and then added the blocks. I was having problem with the prop guard hitting the driveway every time I pulled it out of the garage. Cal trailer was the only place I could find lifting blocks on line that indicated they would work with the mastercraft trailer.
__________________
1993 Blue Stars and Stripes Prostar Powerslot 351HO Mastercraft: Face It - If you are not a good skier behind this boat, you are not a good skier.
|
|
#17
03-06-2014, 10:10 PM
|
||||
|
||||
|
having same issue with new garage
Will this work on a tandem trailer, 2003 Anniv. with 14 inch wheels. Trailer is at the and I can't inspect to see the springs and axle. Thanks in advance, I only need an inch.
__________________
Previous Boats: 04 X7, 98 190, 96 205, Sylvan Deck Thanks and best wishes, George & Sara Amonette 770 634 5437 [email protected]
|
|
#18
03-07-2014, 09:43 AM
|
|||
|
|||
|
I have always gone to a place that replaces springs or sells them (not a box store). When I was a diesel mechanic we brought a representative sample of what we needed. For example round top, square top, diameter and length. They would bend them up for us right there on site. Mutual Wheel in Rockford, Illinois used to do this. Ask a heavy truck repair place where you could get U-bolts bent for your application. Easier then looking on dozens of websites trying to find a perfect match.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
