Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Reply
 
Thread Tools Display Modes
  #1  
Old 06-13-2016, 12:18 PM
MC Lovin MC Lovin is offline
TT Newbie
 
Join Date: May 2016
Boat: 2007 Mastercraft X-Star
Location: MN
Posts: 9
3000 RPM's Cutting out

First off I did search this, And seen a ton of info.

Here is what happened, I started the boat in pretty shallow sand beach. When i took off boat ran fine and then cut out and check engine light came on within a minute. Oil pressure and temp were the same as usual. After running at idle speed for 10 minutes I shut the boat off and restarted it and same issue.

Again, I turned the key off but this time I did a battery disconnect and restarted it and boat ran fine all the way home which is about a half hour ride.

Should i still be concerned? I'm thinking maybe I did suck some sand and it wasn't getting enough water and whatever was clogging it came out and the battery disconnect reset the computer per say.

Any thoughts are GREATLY appreciated!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 02:00 PM.


2018