Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2018, 01:53 PM
JRfire JRfire is offline
TT Newbie
 
Join Date: Mar 2018
Boat: Master craft x15 2008 5.7 rtp1
Location: Southeast
Posts: 12
Attitude adjustment plate x15

Whatís up everyone! New to TT long time mastercraft fan. I have a 2008 x15 and want to know what ppl think about the attitude adjustment plate. Iím an aggressive open water slalom skier. I know I wonít get a ProStar wake out of it but does the plate lay it down good enough to warrant getting it installed?
Reply With Quote
  #2  
Old 03-13-2018, 04:12 PM
Shaun R's Avatar
Shaun R Shaun R is offline
MC Devotee
 
Join Date: Jun 2014
Boat: 2011 X25
Location: Austin, Texas
Posts: 1,719
In the market for a similar boat and I would prefer if it had one. It will help with smoothing out the slalom wake, getting on plane with heavy ballast, lengthen surf wave, and get the bow down when cruising for better fuel economy.
Reply With Quote
  #3  
Old 03-13-2018, 04:57 PM
JRfire JRfire is offline
TT Newbie
 
Join Date: Mar 2018
Boat: Master craft x15 2008 5.7 rtp1
Location: Southeast
Posts: 12
Thanks Shaun R for the reply. I’ve been racking my brain weather to get the plate or look for another MC, but the family likes the boat and so do I, but I love to slalom as well. Now I just need to find out where to buy one. I’m
Reply With Quote
  #4  
Old 03-13-2018, 06:29 PM
lakedrum03's Avatar
lakedrum03 lakedrum03 is offline
MC Fanatic
 
Join Date: Jul 2017
Boat: 2003 X-Series MCX
Location: Ohio
Posts: 543
You can put a package together yourself fairly easily. Bennet and lenco sell the pieces ala carte. Then, you would install for your particular set up.

I have looked into doing this on my 205v based hull and will do it eventually.
__________________
Being on a boat that's moving through the water, it's so clear. Everything falls into place in terms of what's important and what's not. - James Taylor
Reply With Quote
  #5  
Old 03-13-2018, 09:35 PM
jwindsor's Avatar
jwindsor jwindsor is offline
TT Newbie
 
Join Date: Sep 2017
Boat: 2006 Mastercraft X15
Location: Southeast
Posts: 21
I have a 2006 x15 and installed a trim tab earlier this winter. Based on what I read it would help with flattening out the wake some as well as helping drop the nose of the boat and clean up the surf wake. I also like to slalom and wanted to be able to make the wake smaller. Iím ready for some warm weather so I can get it out and see what kind of difference it makes. There is a tread I started that has exactly what I did and part numbers I used. Here is a link to the thread. Pictures are upside down and sideways, canít figure out how to fix that. Maybe it will help you though.

http://www.mastercraft.com/teamtalk/...ad.php?t=82839
Reply With Quote
  #6  
Old 03-14-2018, 01:49 AM
wheelerd's Avatar
wheelerd wheelerd is offline
MC Devotee
 
Join Date: Dec 2007
Boat: 2005 X2
Location: Central Alberta, Canada
Posts: 1,856
I installed a Bennett plate on my 05 X2 (205V hull) several seasons ago.
Helps with both slalom wake and surf wake . . . although not as dramatically as I had hoped but it is noticeable.
I have an install thread here somewhere. Sorry, don't have time to look now.
__________________
2005 X2, Viper Red, MCX, OJ TZ-X5 prop, PPass, rear 750 sacs, KBS, IBS, Bennett Wake Plate, custom wake shaper
(previous) 2001 X5, 1991 TriStar 190
Reply With Quote
  #7  
Old 03-14-2018, 12:30 PM
JeremyJ JeremyJ is offline
TT Regular
 
Join Date: Apr 2017
Boat: Mastercraft, Prostar, 2015, 5.7ltr
Location: Midwest
Posts: 30
I installed one a 2007 214DD... yes it helped some. There is a thread on this site with more details. My advise is you do not need electric actuators. The negative angle needed is consistent enough to just go with adjustable manual standoffs.

However, after all i went through i ended up just buying a 2015 Prostar and can't say enough about the wake on that boat!
Reply With Quote
  #8  
Old 03-14-2018, 12:41 PM
MC25's Avatar
MC25 MC25 is online now
MC Master Poster
 
Join Date: Nov 2007
Boat: 2016 X30, 85 S&S
Location: Grapevine, Texas
Posts: 14,559
If you’re an “aggressive open water skier” I would look into a different boat honestly
__________________
-Aric

LONE STAR MASTERBASH 2018!!!!!!

http://www.mastercraft.com/teamtalk/...30#post1417530

2016 X30-Wetsounds galore
2017 Misty Harbor Tri-Toon
1985 S&S- Gone but never forgotten
Reply With Quote
  #9  
Old 03-14-2018, 02:31 PM
JRfire JRfire is offline
TT Newbie
 
Join Date: Mar 2018
Boat: Master craft x15 2008 5.7 rtp1
Location: Southeast
Posts: 12
Thanks guys for the replies! It’s gonna be a tough decision. I guess I’ll put the plate on the x15 and if I’m still not ok with the slalom wake, when I sell it I’ll ask that much more�� Hopefully I’ll get to it soon, it’s starting to warm back up here in Florida, and I’m itching to get it back on the water!
Reply With Quote
  #10  
Old 03-15-2018, 09:53 PM
Justin D.'s Avatar
Justin D. Justin D. is offline
TT Regular
 
Join Date: May 2012
Boat: 1987 ProStar 190
Location: Mountain West
Posts: 55
I have a 2012 x-15 with the center attitude plate. I set it to 70%, fill the KGB to 25% and run about 32mph. It's no Prostar, but it gets the job done for casual open water skiing. It makes a massive difference with the plate down, strongly recommend. I also use the plate to help smooth out the ride in the chop, works like a charm.

Sent from my SM-G950U using Tapatalk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 05:26 PM.


2018