Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 04-14-2016, 06:31 AM
whiskeyriver's Avatar
whiskeyriver whiskeyriver is offline
MC Fanatic
 
Join Date: Aug 2014
Boat: 99 prostar 205 LTR
Location: Southeast
Posts: 529
Lead was used in gasoline to lower combustion temperatures. Hardened valve seats were implemented in engines to withstand the higher combustion temps of unleaded gasoline. Using unleaded gas in a "pre-unleaded" engine can cause valve and valve seat damage. Personally, I would pull the heads and have a machine shop install hardened valve seats and new valves. Shouldn't be more than a few hundred bucks. Until then I would definitely use a lead substitute/additive in the gas.
If you feel this damage has already occurred in your engine, an easy test is to remove the valve covers and rocker arms and lay a straight edge across the tops of the valve stems. Any deviation in valve stem height is a sign of trouble.
Reply With Quote
 

Tags
351, cam, engine, idle, shake

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 07:57 AM.


2018