Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Electrical

Thread Tools Display Modes
Old 10-22-2018, 07:48 AM
tomski2001 tomski2001 is offline
TT Newbie
Join Date: Apr 2018
Boat: 2001 X-Star
Location: Northwest
Posts: 23
2001 Xstar 205v Bilge

Bit of a flyer here, but does anyone know where the connector for the auto bilge switch emerges from the loom?

I've got the single pump at the aft starboard side of the engine. The switch is bust and I've taken it out, but it wasn't connected. No stray wires near it, but there was a trailing connection coming out of the loom at the forward end of the motor with a two pin Deutsch connector on it. About the right length, but seems to head in the wrong direction and seems heavy gauge wire for a float switch.

I ran without auto last year and have got a new pump and switch so want to restore auto. I can rewire to do it, but if I can avoid it I will.

Easily Parted From Money
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 07:23 AM.