Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 08-30-2018, 03:51 PM
Tookeymonster's Avatar
Tookeymonster Tookeymonster is offline
TT Enthusiast
 
Join Date: Sep 2017
Boat: MasterCraft, NXT22, 2018, 5500 Ilmor, GenII w/710 bags
Location: West
Posts: 197
Oil Extractor?

I searched but did not find much of anything on here.

What Oil Extractors are yall using and how do you like them? I'm going to borrow a friends and test it out but wondering what you folks like to use.
Reply With Quote
  #2  
Old 08-30-2018, 03:56 PM
John Johnson John Johnson is offline
TT Enthusiast
 
Join Date: Aug 2013
Boat: 2018 NXT22 Prior 2002 Maristar 230 VRS
Location: Southeast
Posts: 228
I just got an electric JABSCO unit. Haven't used it yet but that's what my tech uses. Drains in a few minutes.
Reply With Quote
  #3  
Old 08-30-2018, 04:01 PM
d2jp's Avatar
d2jp d2jp is offline
MC Fanatic
 
Join Date: Jun 2011
Boat: 1992 PS 205-351w,285HO
Location: Smith Mountain Lake, VA
Posts: 897
I purchased one last year made by Pela. MityVac also has a similar extractor - game changer for DIY oil and transmission in boats. Also used it for automobiles as well.
https://www.youtube.com/watch?v=YQ-lYY6oFOU
http://www.mastercraft.com/teamtalk/...16#post1345916
__________________
Jack
-----------------------------------------
1992 ProSport 205
(Former) 1989 ProStar 190 Power Slot
Smith Mountain Lake, VA
Reply With Quote
  #4  
Old 08-30-2018, 04:07 PM
IBR IBR is offline
TT Enthusiast
 
Join Date: Jan 2016
Boat: 2014 X-Star 7.4L Past: '99 Prostar 195, '01 X-Star, '07 X-Star
Location: Lake Martin, AL
Posts: 324
+1 Mity Vac

I think its a 1/4" NPT to Barb fitting for connecting to the oil drain hose...
Reply With Quote
  #5  
Old 08-30-2018, 04:32 PM
rbuss4's Avatar
rbuss4 rbuss4 is offline
TT Enthusiast
 
Join Date: Apr 2016
Boat: 2015 Tige RZR
Location: Midwest
Posts: 220
Purchased this on last week on Amazon.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Can't keep paying $250 per oil change every 25 hours. Gonna try myself other than before storage and winterization. The shop can do that one.
Reply With Quote
  #6  
Old 08-30-2018, 04:42 PM
88 PS190 88 PS190 is offline
MC Maniac
 
Join Date: Aug 2005
Boat: 1988 MC Prostar 190, 351 Ford
Location: Midwest
Posts: 4,358
Send a message via AIM to 88 PS190
I've had topsider - I found it pretty messy to use.

The Mity Vac is what I went do - nice to see how full it is (topsider you can't) also the top sider can pull oil into the vacuum pump pretty easily which will spray out when you pump it.

The 1/4" NPT barb fitting can be substituted for a standard air hose fitting (1/4" npt female to male air line) which is usually cheaper than a proper barbed fitting.

The MityVac if you buy one, before you use it for oil, pull the lid off ~8 phillips screws. there is an aluminum cylinder into the tank which has a sealed end, clean it with brake cleaner and cover the end seam with JB weld or silicone caulk, then reassemble it, pull a vacuum and cap the line so that it pulls some of that goo into the vacuum pump end. Otherwise the sealant they use in assembly will fail if you suck up certain chemicals.
Reply With Quote
  #7  
Old 08-30-2018, 05:29 PM
Shaun R's Avatar
Shaun R Shaun R is online now
MC Devotee
 
Join Date: Jun 2014
Boat: 2011 X25
Location: Austin, Texas
Posts: 1,728
I have this one, cannot recommend. Works well but likes to leak oil out the yellow part of the pump.
https://rover.ebay.com/rover/0/0/0?m...2F360869147357
Reply With Quote
  #8  
Old 08-30-2018, 05:51 PM
GoneSkiing GoneSkiing is offline
TT Enthusiast
 
Join Date: Jan 2016
Boat: 2015 NXT20
Location: Rocky Mountains
Posts: 131
I have the Mity Vac, easy to use.
Reply With Quote
  #9  
Old 08-30-2018, 07:53 PM
moosehead's Avatar
moosehead moosehead is online now
MC Maniac
 
Join Date: May 2015
Boat: '15 X10 6.0L, '15 X30 6.2L
Location: Mountain West
Posts: 2,687
Oil Extractor?

1) Get the extractor, virtually all work so long as 6 qt capacity so it is once and done. Warm the block by running first.

2) Any oil extractor works really well via the barbed fitting on MC oil pan hose end. Can do so quickly, cleanly and sitting on a trailer or lift from the main cabin.

All else goes south if you otherwise use the dip stick which slows it down, may leave a extractor hose stuck in the block, and could cause leaks elsewhere in any extractor which is working too hard to suck it via the small dipstick.

Yep, thatís what she said.


Sent from my iPhone using Tapatalk Pro
Reply With Quote
  #10  
Old 08-30-2018, 08:26 PM
j2nh j2nh is offline
TT Enthusiast
 
Join Date: Aug 2004
Posts: 230
Mityvac. Easy to use, incredibly quick if the oil is warm, no mess, no fuss.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 11:45 PM.


2018