Go Back   TeamTalk > Classifieds Buy/Sell > For Sale: Parts & Accessories

Reply
 
Thread Tools Display Modes
  #241  
Old 04-17-2018, 11:09 PM
jesam jesam is offline
MC Fanatic
 
Join Date: May 2015
Boat: None
Location: Southeast
Posts: 667
Perfect!
Reply With Quote
  #242  
Old 04-21-2018, 06:18 PM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 854
Parts arrived this week and I have a few ready. I'm going to ship them in the order that people confirmed. When I get to yours I'll PM you and email a paypal request.

Here is the starter module. Wires are labelled but I'll probably make a label for the front with wire color/function also.
Attached Images
 
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Ballast Timer Reprogramming Info
Reply With Quote
  #243  
Old 04-21-2018, 08:07 PM
BozickA88 BozickA88 is offline
TT Regular
 
Join Date: Sep 2014
Boat: 2009 197 prostar WTT
Location: Deerfield OH
Posts: 61
Great, so my boat does not have a seat heater but I do have the switch, I assume its ok to just use that switch instead of a hidden one to turn is on and off correct?
Reply With Quote
  #244  
Old 04-21-2018, 08:37 PM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 854
Quote:
Originally Posted by BozickA88 View Post
Great, so my boat does not have a seat heater but I do have the switch, I assume its ok to just use that switch instead of a hidden one to turn is on and off correct?
Yeah, that would be perfect.
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Ballast Timer Reprogramming Info
Reply With Quote
  #245  
Old 05-03-2018, 10:21 PM
jesam jesam is offline
MC Fanatic
 
Join Date: May 2015
Boat: None
Location: Southeast
Posts: 667
Is there any reason you cant eliminate the on/off toggle switch and ground the master module directly? I have no use for the toggle that i can think of.
Reply With Quote
  #246  
Old 05-04-2018, 01:04 AM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 854
Quote:
Originally Posted by jesam View Post
Is there any reason you cant eliminate the on/off toggle switch and ground the master module directly? I have no use for the toggle that i can think of.
You can do that. The control module does pull a little current even when the boat is off so the toggle switch will allow you to switch it off completely. If you have a main battery switch then turning that to off would accomplish the same thing.
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Ballast Timer Reprogramming Info
Reply With Quote
  #247  
Old 05-04-2018, 01:10 AM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 854
Update. I've shipped about 2/3 of the starter kits. I'm moving this weekend so the next 1/3 will be a little later. I should be able to get those all out by the middle of the month though.
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Ballast Timer Reprogramming Info
Reply With Quote
  #248  
Old 05-23-2018, 10:14 AM
mcolinb mcolinb is offline
TT Enthusiast
 
Join Date: Nov 2014
Boat: 05 XStar
Location: East Texas
Posts: 211
Maybe this has already been covered in the previous 25 pages, but I attempted to install this yesterday and I found that my ignition wires are extremely short and made it nearly impossible to see what was labeled on the key ignition switch. Also, it seemed as though my instructions were created with the intent of keeping and re-mounting the key switch and didn't include references to the toggle switch. Any help would be appreciated.
__________________
Current: 05 XStar
Previous: 97 ProStar 205
Reply With Quote
  #249  
Old 05-23-2018, 03:06 PM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 854
True, the instructions were created with keeping the ignition switch and using it as the cut-off. You don't need to do that you can use the toggle that was included as the cut-off switch. Its up to you.

For the short ignition wires, take a look at the diagram in the instructions that shows the back of the key switch. it will give you an indication of what wires go where on that switch. One diagram is for the type of switch that has accessory on a left turn of the switch. The other diagram is for the type that has accessory, on, start as all right hand turns of the switch.
You could extend the wires with an extra length of wire using wire nuts if needed. PM me if you need some more help/info.
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Ballast Timer Reprogramming Info
Reply With Quote
  #250  
Old 06-11-2018, 03:11 AM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 854
All kits have been shipped.

I have a few sets of parts left over, so if anyone missed the first round and wants a kit, let me know.
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Ballast Timer Reprogramming Info
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:01 AM.


2018