Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Trailers

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-26-2012, 10:43 PM
Ski-me's Avatar
Ski-me Ski-me is offline
MC Maniac
Join Date: Mar 2007
Boat: Mastercraft, Prostar 205, 1994, LT1
Location: Rocky Mountains....Colorado Springs
Posts: 3,521
Originally Posted by bturner2 View Post
I saw this on the California trailer site. Not sure if this is the same pivot mounting that MC uses but it might be a better option as you would have to reuse any of the plates. If it doesn't match up all you would need to have done would be to cut off the main tube bracket and weld on the new one.


Apparently, the bolt pattern of the UFP hinge is not the same as the Reliable, that's why the easiest fix seems to be to cut the Reliable actuator away from the hinge assembly and weld in a UFP outer member (this way you only have to take the actuator section to your local trailer shop to be painted). Alternatively, as stated above, cut away the entire thing, including hinge assembly, and weld on the UFP assembly from caltrailerworks (then drag the entire boat down to the shop to get the new parts painted). Also, I think the one from caltrailerworks is longer which could potentially cause a problem if your safety cables aren't long enough - or maybe they will fabricate it to what ever length you need to match your original?
Again, be sure to get the correct inner member for your particular set-up.
Yes, they will custom make it any length you want for the same price. I chose 20" from center of ball to hitch pivot point.
- Jeff

1994 205, LT1
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 01:13 AM.