Go Back   TeamTalk > Classifieds Buy/Sell > Wanted to Buy

Reply
 
Thread Tools Display Modes
  #1  
Old 05-07-2014, 11:30 PM
St1cky's Avatar
St1cky St1cky is offline
TT Newbie
 
Join Date: Aug 2012
Boat: 2012 X25
Location: Texas
Posts: 27
New ZFT2 tower rack or just the mount?

Where could I find just this part? Had a mishaps at the marina when I broke down the other day. While my boat was floating dead in the water I was paying more attention to keeping the boat from striking the dock too hard and wasn't paying attention to the board rack that was being bent back by a pole at the dock. Anyways, there didn't appear to be any damage at the time that would warrant having mastercraft tech look at it yesterday morning. However today at the lake I moved the rack and noticed that it was a lot tighter to turn and then I heard a snap. One of the screws in the bottom cap was broken while the other was bent. I was able to extract the bent screw but no such luck on the broken one. I may can save this part by putting it on a drill press and re-tapping but I'm not getting my hopes up being that its aluminum.

Thanks.

Reply With Quote
  #2  
Old 05-08-2014, 03:25 PM
St1cky's Avatar
St1cky St1cky is offline
TT Newbie
 
Join Date: Aug 2012
Boat: 2012 X25
Location: Texas
Posts: 27
Problem solved. Found a replacement.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 09:28 PM.


2018