Go Back   TeamTalk > General MasterCraft Topics > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 04-28-2014, 11:19 PM
lashburn1's Avatar
lashburn1 lashburn1 is offline
MC Addict
 
Join Date: Aug 2013
Boat: 2015 X20 SS
Location: Oceanside California
Posts: 5,056
X30 2013 LISTING Problem

This an equally weighted X30 - 2013 wit Pro and Surf packages
TABS are even and Pinned Properly
Driving Straight

What might cause this???

Dealer has "checked system" can can't find problems...
Attached Images
 
__________________

2015 X20 SS GEN2 6.0
2016 G21 Coastal
2014 X46 GEN2 7.4
2014 X30 GEN2 5.7
2006 VRS200 SS 5.7
2013 X30 GEN2 6.2
2013 Yamaha 242LS
Reply With Quote
  #2  
Old 04-28-2014, 11:22 PM
jdhart73's Avatar
jdhart73 jdhart73 is offline
MC Fanatic
 
Join Date: Jul 2009
Boat: 2013 X30
Location: Midwest
Posts: 596
Gen 1 surf tabs?
Reply With Quote
  #3  
Old 04-28-2014, 11:24 PM
jdhart73's Avatar
jdhart73 jdhart73 is offline
MC Fanatic
 
Join Date: Jul 2009
Boat: 2013 X30
Location: Midwest
Posts: 596
It certainly looks like it is listing to the starboard side more from the shape. If both tabs are fully retracted and you have verified all tanks are full (via overflowing) and people are evenly situated throughout the boat then I am not sure?

Use the tabs to shape it is all I can say.
Reply With Quote
  #4  
Old 04-28-2014, 11:29 PM
lashburn1's Avatar
lashburn1 lashburn1 is offline
MC Addict
 
Join Date: Aug 2013
Boat: 2015 X20 SS
Location: Oceanside California
Posts: 5,056
Quote:
Originally Posted by jdhart73 View Post
It certainly looks like it is listing to the starboard side more from the shape. If both tabs are fully retracted and you have verified all tanks are full (via overflowing) and people are evenly situated throughout the boat then I am not sure?

Use the tabs to shape it is all I can say.
Gen 1 tabs,
I have the same boat as this guy, mine leans towards starboard a bit...just figure it was me and the Cooler.... I compensate with TABS as needed when cruising..

My wake does not look like this...

He says Dealer and MC are stumped?

I think the Tab has a glitch and is deploying on him??
__________________

2015 X20 SS GEN2 6.0
2016 G21 Coastal
2014 X46 GEN2 7.4
2014 X30 GEN2 5.7
2006 VRS200 SS 5.7
2013 X30 GEN2 6.2
2013 Yamaha 242LS
Reply With Quote
  #5  
Old 04-28-2014, 11:31 PM
jdhart73's Avatar
jdhart73 jdhart73 is offline
MC Fanatic
 
Join Date: Jul 2009
Boat: 2013 X30
Location: Midwest
Posts: 596
Yeah something has to be off, thats too much of a discrepancy from one side to the other to just be him and a cooler like you mentioned in yours. Unless of course he is 600lbs.
Reply With Quote
  #6  
Old 04-28-2014, 11:43 PM
lashburn1's Avatar
lashburn1 lashburn1 is offline
MC Addict
 
Join Date: Aug 2013
Boat: 2015 X20 SS
Location: Oceanside California
Posts: 5,056
Quote:
Originally Posted by jdhart73 View Post
Yeah something has to be off, thats too much of a discrepancy from one side to the other to just be him and a cooler like you mentioned in yours. Unless of course he is 600lbs.
Right?
Especially at Cruise speeds....

either he has a Bad Hull (warped or misshapen)
or His Tab and Actuator are not behaving ?
__________________

2015 X20 SS GEN2 6.0
2016 G21 Coastal
2014 X46 GEN2 7.4
2014 X30 GEN2 5.7
2006 VRS200 SS 5.7
2013 X30 GEN2 6.2
2013 Yamaha 242LS
Reply With Quote
  #7  
Old 04-28-2014, 11:55 PM
madcityskier's Avatar
madcityskier madcityskier is offline
MC Devotee
 
Join Date: Sep 2008
Boat: 85 Stars&Stripes, safe-t-top, trick realease, boom, flitepipe pylon
Location: madison, wi
Posts: 1,990
My 85 wake looks like a smaller version of that when I'm driving it alone. Based on the sized difference of the boats, and my weight, you don't happen to weigh about 675lbs. do you?
;-)
__________________
I spent most of my money on booze, broads and boats. The rest I wasted. - Elmore Leonard
I had always thought that there was nothing quite so sad as an abandoned boat.-Terry Hayes
Reply With Quote
  #8  
Old 04-29-2014, 12:49 AM
lashburn1's Avatar
lashburn1 lashburn1 is offline
MC Addict
 
Join Date: Aug 2013
Boat: 2015 X20 SS
Location: Oceanside California
Posts: 5,056
Not my Boat , but I have the Same set up...
Guy looks about 210-220

That wash is not right?
__________________

2015 X20 SS GEN2 6.0
2016 G21 Coastal
2014 X46 GEN2 7.4
2014 X30 GEN2 5.7
2006 VRS200 SS 5.7
2013 X30 GEN2 6.2
2013 Yamaha 242LS
Reply With Quote
  #9  
Old 04-29-2014, 01:01 AM
ap77's Avatar
ap77 ap77 is offline
MC Devotee
 
Join Date: Aug 2011
Boat: 2015 MasterCraft X-20
Location: Northwest
Posts: 1,292
Does the boat track straight if you let go of the wheel? How much weight do you have to put on the port side to equalize the wake? Do you have anyone else in the boat? Something is definitely off. Could a bent tracking fin cause this?
__________________
- Andrew

2015 MasterCraft X-20 (current)
2009 MasterCraft X-2 (sold)
Reply With Quote
  #10  
Old 04-29-2014, 01:04 AM
mcLove mcLove is offline
TT Enthusiast
 
Join Date: Jun 2013
Boat: Mastercraft, X23, 2016, 7.4
Location: Southwest
Posts: 277
I'm am completely stumped with this...
__________________
Current boat: 2016 x23 7.4

Previous boat: 2003 x9
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 01:19 AM.


2018