Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Upholstery

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-13-2013, 06:06 PM
Cloaked Cloaked is offline
MC Maniac
Join Date: Dec 2004
Boat: MasterCraft
Location: Kingston,TN USA
Posts: 4,892
Originally Posted by bochnak View Post
Thanks for the response. The rear floor section is in good shape, so I'll leave it alone for now. I am missing some motorbox hinge screws as well as the gas shocks, which I will replace.

I do however, need to replace the front floor section near pylon. I'll follow your advice on rebuilding this portion.
So this setup still leaves you with an attached floor piece to the hood until you lift it out of the boat. Is that your intent? The nylon nuts or most others will not allow you to seperate the two pieces while in the boat. Just asking....it's jimmy crack corn to me...
93 190
Don't be a boot licker

Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8

Originally Posted by Thrall View Post
..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

RE: Thrall, Welcome to the club....

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 12:17 PM.