Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Reply
 
Thread Tools Display Modes
  #1  
Old 11-03-2013, 07:56 AM
zsqure's Avatar
zsqure zsqure is offline
MC Fanatic
 
Join Date: Jun 2012
Boat: MC ProStar 209, 2001, LTR, Blue
Location: in the 330
Posts: 635
Remove oil filter.

I am having a heck of a time removing my oil filter. It won't budge and I have begun to collapse the tin housing. I'm using a rubber strap wrench. I have the LTR 330 the 351 was a lot easier to get to.
Reply With Quote
  #2  
Old 11-03-2013, 08:16 AM
jgraham37128 jgraham37128 is offline
MC Fanatic
 
Join Date: May 2012
Boat: 2010 Mastercraft X2
Location: Center-Hill Lake / Southeast
Posts: 872
Oil Filter

From the looks of the picture, you're going the wrong way. The collapse is on the left side of the filter and the pressure should be on the right side? Unless you had the wrench in a funky way. Just like your other boat it should be very easy to get off. Now it maybe very tight so you may have to apply a little more pressure to get it loose.

You should be pushing the wrench toward the rear of the boat.



Hope this helps.
Reply With Quote
  #3  
Old 11-03-2013, 08:20 AM
zsqure's Avatar
zsqure zsqure is offline
MC Fanatic
 
Join Date: Jun 2012
Boat: MC ProStar 209, 2001, LTR, Blue
Location: in the 330
Posts: 635
I thought it was righty tighty lefty loosey. I am pushing it away, turning it to the left. It's not left hand thread is it?
Ok will try it the other way, WTH cant hurt.
Reply With Quote
  #4  
Old 11-03-2013, 08:23 AM
clrussell's Avatar
clrussell clrussell is offline
MC Devotee
 
Join Date: Jul 2012
Boat: 1990 mastercraft p190
Location: midwest
Posts: 1,923
It should be normal threads, I've never seen a reverse thread oil filter. Move closer to the base of the filter if you can. They are a lot stronger in that area.
__________________
1990 prostar 190, 351, powerslot 1.5:1, tinted windows
Reply With Quote
  #5  
Old 11-03-2013, 08:25 AM
CantRepeat's Avatar
CantRepeat CantRepeat is online now
 
Join Date: Jul 2008
Boat: 06 X30
Location: Roll Tide!!
Posts: 8,430
I use one of these bottom filter wrenches. I have to tap it on with a hammer. Your current filter must have correct bottom to use this tool



There is a service advisory about the wrench.
Attached Images
File Type: pdf SV2009-3 OIL FILTER REMOVAL.pdf (47.8 KB, 88 views)
__________________
Tim
Gone, surfing.
Reply With Quote
  #6  
Old 11-03-2013, 08:38 AM
zsqure's Avatar
zsqure zsqure is offline
MC Fanatic
 
Join Date: Jun 2012
Boat: MC ProStar 209, 2001, LTR, Blue
Location: in the 330
Posts: 635
Remove oil filter.

Ok I got it what a PITA. I was turning the correct way, what a booger to get off. I will have to invest in a different wrench for the next filter change.
Than you for the help.
Reply With Quote
  #7  
Old 11-03-2013, 08:42 AM
jgraham37128 jgraham37128 is offline
MC Fanatic
 
Join Date: May 2012
Boat: 2010 Mastercraft X2
Location: Center-Hill Lake / Southeast
Posts: 872
Great, they are not the easiest thing to get to!

I tighten mine by hand and now remove it by hand. I've never had a problem with one coming loose. Sometimes I have to put a wrench on it to get it off, but most of the time I can loosen it by hand.
Reply With Quote
  #8  
Old 11-03-2013, 08:51 AM
CantRepeat's Avatar
CantRepeat CantRepeat is online now
 
Join Date: Jul 2008
Boat: 06 X30
Location: Roll Tide!!
Posts: 8,430
Quote:
Originally Posted by zsqure View Post
Ok I got it what a PITA. I was turning the correct way, what a booger to get off. I will have to invest in a different wrench for the next filter change.
Than you for the help.
Awesome, glad you got it off.

Don't forget to make sure that the old rubber gasket came off as well. Sometimes they stick to the bottom of the engine and make it a pain to get the new filter on and when you do they leak!
__________________
Tim
Gone, surfing.
Reply With Quote
  #9  
Old 11-03-2013, 08:52 AM
thatsmrmastercraft's Avatar
thatsmrmastercraft thatsmrmastercraft is offline
MC Master Poster
 
Join Date: Sep 2008
Boat: 1977 Stars & Stripes
Location: St. Paul, MN
Posts: 14,921
Don't forget to lube the o-ring on the filter with a little oil before installation. It will be much easier to remove in the future.
__________________
Peter

Tandem Axle Wheel & Tire Package $659
4 S5 or S5 Black 14x5.5 wheels, 4 ST205/75R14 Kenda Loadstar tires

Single Axle Wheel & Tire Package $399
2 S5 or S5 Black 14x5.5 wheels, 2 ST205/75R14 Kenda Loadstar tires
MOUNT, BALANCE & FREE SHIPPING INCLUDED IN BOTH PACKAGES



CARB REBUILDING - FAST TURN-AROUND - $125 +PARTS
LED lights, Hubs, Spare Tire Carriers, Chrome & Powder Coated Lug Nuts - Red, Blue & Black


PM or email me tiresplease@gmail.com
Reply With Quote
  #10  
Old 11-03-2013, 08:57 AM
mikeg205's Avatar
mikeg205 mikeg205 is online now
Moderator
 
Join Date: Aug 2011
Boat: 1995 Pro Star 205 5.7 Liter
Location: Plainfield - Joliet, IL
Posts: 11,211
Send a message via Skype™ to mikeg205
Quote:
Originally Posted by jgraham37128 View Post
Great, they are not the easiest thing to get to!

I tighten mine by hand and now remove it by hand. I've never had a problem with one coming loose. Sometimes I have to put a wrench on it to get it off, but most of the time I can loosen it by hand.
I'm with you. I always hate changing filter when someone over tightens. I only hand tighten as well. Still always need tool to remove.
__________________
...A bad day water skiing still beats a good day at work...1995 Pro Star 205....
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 08:53 AM.