Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Trailers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-22-2013, 11:36 PM
strad's Avatar
strad strad is offline
TT Enthusiast
 
Join Date: May 2010
Boat: 1984 Stars and Stripes Powerslot
Location: Las Vegas, NV
Posts: 453
Going to be working on bunks this winter--a few questions

My bunks are fastened to the trailer with incorrect fasteners, several of which are loose/stripped. So my plan is to do one side at a time. Dump the boat off in the lake in the early morning, drive back to the house (not far) replace the bunk and do the carpet, then drive back and pick up the boat. Do the other bunk the next week. Since the boat is not going to be in a secured area, I need to have my ducks in a row and have the replacement go like clockwork. Which is where you guys come in lol.

I'm assuming stainless fasteners? my plan was to through bolt it -- bolt going down from the top (recessed in the wood) and a nut on the bottom. Then wrap the carpet over the top and staple it on on the bottom edges? My bunks are 11 feet 1 inch long, 2 x 6 wood. I see overtons sells carpet at 12 feet by 12 inches wide? That would work for the overlap right? And pressure treated wood? That's about all I can think of. I haven't done the recesses before -- don't have the drill bit for it either. What bit do I need? Plan was to use those bolts with the round head (I forget what they are called -- similar to lag bolts). and nuts and washers on the bottom side. Any other suggestions welcome.
__________________
1984 Stars and Stripes Powerslot
White with blue stripes. purchased 9/2012
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 01:40 PM.