Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Storage / Winterization

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-18-2013, 01:22 PM
tim in wisc tim in wisc is offline
TT Newbie
 
Join Date: Oct 2013
Boat: 2000 x star
Location: Wisconsin
Posts: 5
Hose size for LTR raw water pump inlet

Hello,

I'm planning to inspect/purchase a 2000 model with an LTR. I would like to make an "engine filling" bucket to flush the engine and fill with RV antifreeze for the 900 mile trip home. If all goes well after the test ride, it should be a quick deal and I will need to be back on the road.

So, can somebody verify the inlet hose diameter? Is it 1" heater hose?

When I get it home, I will do a proper drain, but I don't want to make the trip from the north east to the midwest with only water in the cooling system, trans cooler, low spots, etc. and worry about having missed a drain area on an engine/system that is new to me.

Thanks in advance.

Tim
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 04:04 PM.