Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Engine / Drive Train

Reply
 
Thread Tools Display Modes
  #1  
Old 10-06-2013, 10:30 AM
Jaxon4's Avatar
Jaxon4 Jaxon4 is offline
TT Regular
 
Join Date: Jul 2012
Boat: 1989 Tristar 190
Location: Midwest
Posts: 56
Buying a lift

I am looking at buying a Hydro Hoist lift for my 89 Tristar. My only concern is looking at lift it seems the clearance from the back metal bar that runs from the float to the other float is very small clearance!! My question is when fully out of the water will the prop and rudder and shaft have enough room...It must be close. I dont want to lift it for the first time and mess my stuff! Any thoughts!!??
Reply With Quote
  #2  
Old 10-06-2013, 10:59 AM
bsloop bsloop is offline
MC Fanatic
 
Join Date: Jan 2005
Boat: 91' MC 240sc
Location: Perry Lake, KS Lake of Ozarks
Posts: 625
You may need to increase the bunk clearance. Sometimes this is just adjusting the brackets, sometimes new brackets.

Make sure the lift can go deeper both in overall water depth and swing arm limit.
__________________
1991 MariStar 240sc, 454, tower, WetSounds, Krypt and Rockford Fosgate
Reply With Quote
  #3  
Old 10-06-2013, 11:10 AM
Jaxon4's Avatar
Jaxon4 Jaxon4 is offline
TT Regular
 
Join Date: Jul 2012
Boat: 1989 Tristar 190
Location: Midwest
Posts: 56
bunk clearance meaning increase the height the boat is lifted from the back metal bars...the brackets can be adjusted then???
Reply With Quote
  #4  
Old 10-07-2013, 12:15 PM
76S&S's Avatar
76S&S 76S&S is offline
MC Devotee
 
Join Date: Jun 2007
Boat: 2002 X Star
Location: At the lake or on the way to the lake!
Posts: 1,863
The brackets can be mounted two different ways which will either increase or decrease clearance. I have my brackets mounted in the tall position, but the prop still doesn't clear the metal cross bar. There may be a taller bracket but I haven't checked into it. The way the boat sits on the bunks I would be too far forward on the lift if the prop was in front of the cross bar.
__________________
Being on the water is best, but when I'm not on the water I'm on TT.

2002 X Star
Sold - 76 S&S
Reply With Quote
  #5  
Old 10-08-2013, 02:44 PM
Jaxon4's Avatar
Jaxon4 Jaxon4 is offline
TT Regular
 
Join Date: Jul 2012
Boat: 1989 Tristar 190
Location: Midwest
Posts: 56
So are you saying yours works with the lift you have ....just have to not go forward so much on the lift so the prop is behind the metal cross bar??? This lift is up to the tallest position as well!
Reply With Quote
  #6  
Old 10-08-2013, 04:31 PM
neil.anderson63's Avatar
neil.anderson63 neil.anderson63 is offline
MC Fanatic
 
Join Date: Dec 2011
Boat: 2007 X2
Location: Kansas City
Posts: 760
We have a Hydrohoist - We use it for all our boats ( 01 XS, 05 X9, 07 X2) without any trouble. We have the tall brackets. I am going down the weekend of the 19th if you want me to take some photos of the brackets.
__________________
Screws fall out all the time, the world is an imperfect place.
Reply With Quote
  #7  
Old 10-08-2013, 06:38 PM
76S&S's Avatar
76S&S 76S&S is offline
MC Devotee
 
Join Date: Jun 2007
Boat: 2002 X Star
Location: At the lake or on the way to the lake!
Posts: 1,863
Quote:
Originally Posted by Jaxon4 View Post
So are you saying yours works with the lift you have ....just have to not go forward so much on the lift so the prop is behind the metal cross bar??? This lift is up to the tallest position as well!
Yes, with the bunks roughly even with the stern of the boat the prop sits about 8 inches behind the cross bar.
__________________
Being on the water is best, but when I'm not on the water I'm on TT.

2002 X Star
Sold - 76 S&S
Reply With Quote
  #8  
Old 10-08-2013, 06:54 PM
KahunaCraft's Avatar
KahunaCraft KahunaCraft is offline
TT Enthusiast
 
Join Date: Oct 2012
Boat: 2012 X30, 6L
Location: Canada
Posts: 439
^^^ what he said. I pull up and the boat is balanced on the lift. I also usually lower the lift far below the boat so that as I pull back in, if I happen to go too far, nothing happens.

There is about 5" of clearance from the prop shaft above that bar that goes across and about a foot between the back of the prop and the back bar.
Reply With Quote
  #9  
Old 10-08-2013, 08:10 PM
ttu's Avatar
ttu ttu is offline
MC Maniac
 
Join Date: Jun 2005
Boat: 2007 X2 towed by a 2012 Touareg TDI
Location: tulsa
Posts: 3,778
I have a hydrohoist and I love it! we use two ropes tied to the dock that we measured where the perfect spot on the lift was. when we come in we grab the rope and put it on the rear cleats. the rope catches so we cannot go any further forward. hopefully you can see in the picture the rope on the rear. (one on each side btw)
Attached Images
 
Reply With Quote
  #10  
Old 10-09-2013, 12:06 PM
Jaxon4's Avatar
Jaxon4 Jaxon4 is offline
TT Regular
 
Join Date: Jul 2012
Boat: 1989 Tristar 190
Location: Midwest
Posts: 56
Quote:
Originally Posted by neil.anderson63 View Post
We have a Hydrohoist - We use it for all our boats ( 01 XS, 05 X9, 07 X2) without any trouble. We have the tall brackets. I am going down the weekend of the 19th if you want me to take some photos of the brackets.
sure..I think i have the non-tall brackets
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 05:23 PM.