Go Back   TeamTalk > Maintenance Tips, How-tos and Refurbishing Topics > Appearance

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-03-2013, 01:04 PM
agarabaghi agarabaghi is offline
MC Maniac
Join Date: Mar 2011
Boat: 1994 Mastercraft Prostar 205
Location: Southeast
Posts: 3,115
2006 X1 Engine Cover - Walk-through

Well after ripping the rear engine cover vinly for the 2nd time. I decided a different route was needed.

I stripped off the foam and vinly and was left with a 5/8" aluminum and honeycomb deck. Took it over to a aluminum fabrication shop and we came up with a design that should be pretty cool.

Hes going to cut out the same size plate (basically a rectangle with 2 little cut outs to reach the handles better) out of 1/4" aluminum plate. We are then going to attach (2) 2" blocks where the hinges screw into, and 2" square pipe will reinforce the edges and sit on the brackets of the boat. Im going to have seadeck.com send me a template kit and make a template for the top part and have it match the colors of the boat and have the mastercraft logo placed in it.

This should
1) clear the airfilter / valve covers which currently where being squished by the oem sundeck as the plastic bin is cracked etc...
2) Allow a nice walk way to get to the back of the boat instead of stepping on the vinyl

I will post pictures are we progress. Hes doing everything in autocad and a cnc machine, so once we have a good prototype it should be hard to duplicate if anyone is interested

OEM piece ripped apart for now.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 04:20 AM.